RFI Town & Country Pack, CDQ2199 9dBi Cellular Mobile + CDQ2194 Whip Antenna CDQ2199 Features: - Cutting edge printed circuit board design - Q-Fit removable whip technology - Widely used by government & emergency services in very remote locations - Supplied with 5m low loss coaxial cable, with female FME connector - Min. 3 dBi gain at 2100 MHz to suit metropolitan applications today and future proofing for network expansions CDQ2194 Features: - PCB based collinear design offering the ultimate in pattern and gain stability - Ideal for all new 3G networks with true multi-band coverage - High vertical beamwidth of 31degrees on 3G 850/900 MHz - 5.5 dBi gain across 824-960 MHz ideal for fringe areas and areas with varying terrain - Min. 3 dBi gain at 2100 MHz to suit metropolitan applications today and future proofing for network expansions Trusted by farmers, grey nomads, and industry professionals Australia wide, the CDQ2199 antenna consistently demonstrates a high gain across all Australian mobile phone networks while the CD2194's performance across 3G850, GSM900/1800, 3G900, GSM-R1800, PCS1900 and 3G2100 makes it ideal for use in fringe areas and rural applications.

Is this antenna right for me?

As a rule of thumb: the higher the dBi, the flatter the angle the antenna can receive from. In hilly areas cell towers are usually located at the peak of the hill, and if you've got a very high gain antenna (like 9dBi) chances are the antenna won't have a tall enough angle to receive from the tower. With a significantly higher gain than the CDQ2195 and CDQ2197, the CDQ2199 is the best performing antenna in flat outback and rural areas, where cell towers are few and far between. "Q-Fit™ removable whip system for fast and simple removal when entering low height areas, car washes or for antenna security." - read more on the RFI website. When travelling through different terrain, the removable antenna can be swapped over to a larger or smaller size and gain, ensuring the best performance in all geographic areas. The secret to this extraordinary performance lies in the use of two unique PCB radiators. These meander circuits are coupled together to deliver extraordinary consistency in gain and pattern. This latest design offers coverage across multiple networks – ideal for the latest requirements where network operators can switch calls between bands. With a 16mm stud mount on an heavy duty electropolished stainless steel spring, these antennas may be installed on a number of mounting brackets and are ideal for installations in commercial vehicles, four wheel drives and trucks. The CDQ2199's fully ground-independent design results in true 9dBi gain regardless of mounting position.

Network Compatibility
Yes/No
Gain
Telstra Next-G™ (850MHz)
compatible
9dBi
New Vodafone Network (850MHz)* *Please check Vodafone Coverage Map.
compatible
9dBi
Optus Regional 3G (900MHz)* *Please check Optus Coverage Map.
compatible
9dBi
All carriers - calls & text (900MHz)
compatible
9dBi
Telstra 4G (1800MHz)
compatible
3dBi
Optus 4G (1800MHz)
compatible
3dBi
All carriers - 3G internet (2100MHz)* Please check your network's Coverage Map.
compatible
3dBi

Electrical and Mechanical Specifications of CDQ2199

Frequency Range: 824-960MHz & 1710-2170MHz Nominal Gain dBi: 9 @ 824 - 960MHz / 3 @ 1710 - 2170MHz Input Impedance: 50Ω VSWR: <2.5:1 Polarisation: Vertical Radiation: Omnidirectional Vertical Beamwidth: 9° & 57° Maximum Power: 10Watts Construction: Fibreglass radome, PCB Radiator, electro-polished stainless steel spring Cable: 5m Cellfoil 9006 low loss coaxial Connector: FME Female Length: 208cm Weight: 1.7kg

Electrical and Mechanical Specifications of CD2194

Frequency Range: 824-960MHz / 1710-2170MHz Nominal Gain dBi: 5.5 @ 824 - 960MHz / 3 @ 1710 - 2170MHz Input Impedance: 50Ω VSWR: <2.5:1 Polarisation: Vertical Radiation: Omnidirectional Vertical Beamwidth: 31° & 57° Maximum Power: 10Watts Construction: Black radome, electro-polished S/S spring Cable and Connector: 5m of 9006 low loss cable with FME Length: 73cm Weight: 0.57kg

Read More

What connection does this antenna have?

This antenna has a 5m cable that terminates with an FME Female connector. The FME Female connector is the most common type of connector for mobile antennas and mates with the FME Male connector found on patch leads and phone cradles.

female FME Connector

FME Female Connector

If you would like a shorter length of cable, or a different connector please send us an email and we can customise this antenna for you.

Important Delivery Information

Special Delivery Information

over-size item symbol signThis product is over 2m in length and must be sent by specialist freight companies. Understandably a 2m long cardboard tube is very easily damaged so this product is shipped in a custom made PVC enclosure. Due to the costs incurred shipping of this item is very expensive, irrespective of whether we're shipping it to Sydney metro, or to Canada. RFI wireless logo

(CDQ7199-B)

SKU CDQ7199-B
Shipping Weight 0.0450kg
Shipping Width 0.075m
Shipping Height 0.075m
Shipping Length 2.200m