RFI COL7199 Pole Mounted Collinear Antenna
- Receives signal from any direction
- Ideal for remote areas
- No setup required.
The COL7199 is a high performance base station antenna that has been designed specifically for semi-mobile structures and vehicles where a directional antenna cannot be used. Capable of receiving from all directions, this antenna can be installed by technicians with no prior telecommunications or radio experience. With an extremely lightweight and low wind-load design the COL7199 can be mounted on tall or light structures without concern for bird-roosting, ice load, etc. Collinear antennas are suited to mobile or temporary site structures and machinery where no on-site technicians are available to accurately install directional antennas. Supplied with 10m RG-58 cabling, 2x Stainless steel hose clamps, and an SMA Male to FME Female adapter.
|Network Compatibility|| || |
|Telstra 4GX (700MHz)|| || |
|Optus 4G+ (700MHz)|| || |
|Telstra Next-G™ (850MHz)|| || |
|Vodafone 4G+ (850MHz)* *Please check Vodafone Coverage Map|| || |
|Optus Regional 3G (900MHz)* *Please check Optus Coverage Map.|| || |
|Vodafone Regional 3G (900MHz)* *Please check Vodafone Coverage Map.|| || |
|Telstra/Optus/Voda 4G (1800MHz)|| || |
|All Carriers - Urban/Metro 3G (2100MHz)|| || |
|Optus 4G TDD (2300MHz)|| || |
|Telstra 4GX (2600MHz)|| || |
Frequency Range: 698-960MHz / 1710-2170MHz / 2300-2700MHz Input Impedance: 50Ω VSWR: <2.5:1 Polarisation: Vertical Radiation: Omnidirectional Vertical Beamwidth: 15°/15°/20° Maximum Power: 10Watts
Construction: Fibreglass radome, PCB radiator Cable: 10m 9006 (RG58) low loss cable Connector: FME Female/with FME female connector and supplied Length: 173cm Weight: 0.622kg Wind Gust Rating: 240km/hr
"Consider the col7199 it's of the quality rfi brand, slim in profile/wind resistance with 10m of coax...will transform your reception, downside is the near $200 cost, did it yesterday from pretty much your situation.....one thing try not to fall into the newby scenario ... of buying an external aerial that is single band only or near single band."
What connection does this antenna have?
This antenna has a 10m cable that terminates with an FME Female connector. The FME Female connector is the most common type of connector for mobile antennas and mates with the FME Male connector found on patch leads and phone cradles.
If you would like a shorter length of cable, or a different connector please send us an email and we can customise this antenna for you.
Special Delivery Information
This product is over 1100mm long and can only be delivered by a courier (not Australia Post). As such we cannot accept a PO Box. Please provide an address where someone will be present to sign for the package.