RFI Cable Termination Load - 5W DC-2400MHz - Excellent return loss over full DC-2.4GHz range - N Male connector - Natural convection cooling - Suits low/medium power applications & test environments. RF Attenuators are designed as general purpose attenuators to reduce signals to required levels. They are typically used in applications such as on the input of preamplifiers, test equipment, or as part of systems designs (such as bi-directional amplifiers) to prevent overload, control gain or to otherwise maintain signals levels within desired limits. Many of our RF Loads have power density factors (the ratio of rated power to heatsink surface area) in the range 0.54 to 0.28watts/in², in some cases three to six times lower than competitive loads of similar power ratings. They use microwave grade, thin film, pyrolytic carbon resistors that exhibit excellent power handling capability and temperature cycling characteristics, as well as low noise and low temperature coefficients.
Important Stock Information This item is not always stored at our QLD warehouse, but is typically available within 24-48 hours from order.