RFI CDQ7199 3G Bullbar Antenna

  • Patented PCB based Meander™ collinear design offering the ultimate in pattern and gain stability
  • Ideal for all new 4G networks with true multi-band coverage
  • High gain across 4GX/4G+ band suiting fringe and rural applications
  • Q-Fit® removable whip system for ease of removal in low height environments such as multi story car parks, car wash’s or for security
  • Supplied with 5m low loss coaxial cable, with female FME connector.

Trusted by government, the farming community, and industry professionals Australia wide, this antenna consistently demonstrates a high gain across all Australian mobile phone networks. The outstanding performance of the CDQ7100 series lies in the use of the patented Meander™ radiating elements. These Meander™ circuits are coupled together to deliver extraordinary consistency in gain, coverage pattern and bandwidth. The result is a unique antenna able to operate across all mobile phone networks globally, housed in the one unit.

Typical Usage

As a rule of thumb: the higher the dBi, the flatter the angle the antenna can receive from. In hilly areas cell towers are usually located at the peak of the hill, and if you've got a very high gain antenna (like 8.5dBi) chances are the antenna won't have a tall enough angle to receive from the tower. With a significantly higher gain than the CDQ7195 and CDQ7197, the CDQ7199 is the best performing antenna in flat outback and rural areas, where cell towers are few and far between. In addition the CDQ7100 series are designed with our Q-Fit® system for quick and simple removal of the whip section. This allows users to remove the whip section when entering car washes, low height areas such as car parks and for security. The antennas are provided with a waterproof sealing cap to prevent the ingress of dust and water when the whip section is removed. With a 16mm stud mount on an heavy duty electropolished stainless steel spring, these antennas may be installed on a number of mounting brackets and are ideal for installations in commercial vehicles, four wheel drives and trucks. The CDQ7199's fully ground-independent design results in true 8.5dBi gain regardless of mounting position.

Network Compatibility
Yes/No
Gain
Telstra 4GX (700MHz)
compatible
8.5dBi
Optus 4G+ (700MHz)
compatible
8.5dBi
Telstra Next-G™ (850MHz)
compatible
8.5dBi
Vodafone 4G+ (850MHz)* *Please check Vodafone Coverage Map
compatible
8.5dBi
Optus Regional 3G (900MHz)* *Please check Optus Coverage Map.
compatible
8.5dBi
Vodafone Regional 3G (900MHz)* *Please check Vodafone Coverage Map.
compatible
8.5dBi
Telstra/Optus/Voda 4G (1800MHz)
compatible
4.5dBi
All Carriers - Urban/Metro 3G (2100MHz)
compatible
4.5dBi
Optus 4G TDD (2300MHz)
compatible
5.5dBi
Telstra 4GX (2600MHz)
compatible
5.5dBi

Electrical Specifications

Frequency Range: 698-960 / 1710-2170 / 2300-2700 MHz Input Impedance: 50Ω VSWR: <2.5:1 Polarisation: Vertical Radiation: Omnidirectional Vertical Beamwidth: 18° / 28° /25° Maximum Power: 10Watts

Mechanical/Environmental Specifications

Construction: Fibreglass radome, PCB Radiator, electro-polished stainless steel spring Cable: 5m Cellfoil 9006 low loss coaxial Connector: FME Female Length: 2080mm Weight: 1.7kg

Read More
 

What connection does this antenna have?

This antenna has a 5m cable that terminates with an FME Female connector. The FME Female connector is the most common type of connector for mobile antennas and mates with the FME Male connector found on patch leads and phone cradles.

female FME Connector

FME Female Connector

If you would like a shorter length of cable, or a different connector please send us an email and we can customise this antenna for you.

Important Delivery Information

Special Delivery Information

over-size item symbol signThis product is over 2m in length and must be sent by specialist freight companies. Understandably a 2m long cardboard tube is very easily damaged so this product is shipped in a double walled box. Due to the costs incurred shipping of this item is very expensive, irrespective of whether we're shipping it to Sydney metro, or to Canada. RFI wireless logo

(4344)

SKU 4344
Shipping Weight 3.4000kg
Shipping Width 0.075m
Shipping Height 0.075m
Shipping Length 2.100m