Galvanised Heavy Duty Microwave Antenna Mount - 75mm Mast-3m

This tripod has been engineer certified for survivability to support dish antennas up to 900mm in diameter in 100km/h winds. Please contact us for maximum dish size, heights and bracing information for your application. Fabricated in our workshop Telco Antennas' galvanised tripod antenna mounts have been specifically designed to meet a demand for large, heavy duty roof mount that can be customized to suit any application. This kit includes a 75mm outside diameter mast and two 40mm box section stay bars. Due to the complicated nature of tower infrastructure it can prove extremely valuable to have an engineer approved recommendation for a solution that will accommodate a particular project. Telco offers a Tower Recommendation Proposal Consultation Service, this provides the customer with a report that can be used for planning of communication assets. The following matrix provides a selection criteria based on the maximum antenna dish diameter and wind region within Australia. Note: Antenna mount was considered unsuitable to support microwave dishes generating lateral deflections at the top of the mast exceeding 50mm or generated wind forces on the mast that over stressed the mast member. These applications are marked X in the matrix.

Masts and Towers have a wait time of minimum 2-3 days


Shipping Weight 30.0000kg
Shipping Width 0.300m
Shipping Height 3.050m
Shipping Length 0.300m