Optus Cel-Fi Pro - Smart Repeater for 3G & 4G
- Minimize dead zones & reduce dropped calls
- Simple 3 Step installation - no cabling or configuring required
- Supports 3G 900/2100MHz, 4G 1800/2600MHz
- Locked to the Optus network
- External antenna port (SMA Female).
The Mobile Smart Repeater for Optus is a convenient solution to poor indoor 3G/4G phone coverage. Installing this device in your home can improve the reliability of phone calls, text messages, and increase 4G mobile broadband signal. For areas with poor outdoor coverage this model has an external antenna connector to allow the connection of a larger antenna.
- Other Optus MVNO Resellers
Once set up, the unit will rebroadcast signal throughout the building allowing nearby mobile phones to automatically receive stronger signal - no pairing, no fiddling about. [collapse title="Why is it legal?"] Many mobile service providers have not supported the use of personal repeaters on their network. This is due to the interference they can cause when connected to the network, or when they are setup incorrectly. The Cel-Fi system is the only personal repeater that has been widely approved by carriers in Australia. The Smart Repeater system is very different to a standard repeater, as it was designed to provide maximum coverage, be network friendly and can be easily installed by the end user. It does this in several ways by: - continuously monitoring power levels of the cell tower it is connected to and constantly adjusting its output power to suit. - only amplifying and disbursing a particular carrier’s mobile signal, operating within a set frequency band. - giving the service provider the ability to shut down the repeater remotely if needed, using a signal from the base station. - not interfering with the carrier’s network or other users on the network. - having a unique installation process to eliminate feedback into the mobile network.
Mobile Smart Repeater - Optus Requirements
As the device is an actively boosted radio transmitter, it is subject to regulatory requirements. You must pass a Optus service qualification check before this repeater can be sent to you - this check consists of 5 questions at the bottom of the page. We will also perform a check of the area upon ordering and may contact you if we have further questions.