Phaseblocker Panel Mount Coaxial Surge Protector
- N Female Bulkhead to N Female connectors
- For devices operating 0-40W
- Bi-directional protection
- DC Pass
- Removable L bracket for bulkhead panel mounting
- Protect your antenna and device from dangerous electrical surges.
Gas tube lightning protection with excellent VSWR and superior RF performance characteristics for equipment operating DC to 6GHz with up to 40W RF power. Male to Female arresters are designed for installation in-line between an antenna and feeder cable. By installing at the tower-top position, this arrester helps protect not only the end user equipment, but the cabling itself. When feeder lengths exceed 20-30m vertically a second arrester is recommended at the equipment end of the cable to protect against parasitic coupling. The arrester features a bulkhead N-Female connector with a rubber O-ring seal for mounting through an enclosure wall or tower mounting with the included stainless steel bracket. Given the critical nature of remote communications, this high grade surge suppressor has been designed with safety as paramount. This device has a built-in multi-strike gas-charging surge arrester element which discharges and grounds the surge the moment the surge voltage exceeds the pre-specified level. This device makes the actions of surge discharge and restoration repeatedly, with tube replacement rarely required.
Frequency Range: DC - 6GHz Input Impedance: 50Ω VSWR: <1.2:1 DC-6GHz Insertion Loss: <0.4dB DC-6GHz Return Loss: >26dB Power Rating: 0-40W Sparkover Voltage: <90VDC Voltage protection level @ 3kA (8/20us): <600V Maximum Discharge Current: 10kA @ IEC 61000-4-5 8/20us waveform
Construction: Nickel plated brass Durability: >500 cycles Connector: N Female Bulkhead to N Female Temperature: -40 to +85ºC / 5 to 95% non-condensing Environmental Protection Level: IP55 Weight: 135g Dimensions: 64 x 26mm (L x Ø)
- Cellular (GSM, UMTS, LTE) - WiMAX - 2.4 & 5.8GHz WiFi - ISM - UNII - Coaxial DC Pass Applications (Remote Amplifiers, LNA, etc)