RFI YB6-65 400-420MHz UHF Yagi Antenna
The YB6-65's feed element of each antenna is of full folded dipole construction thus offering maximum bandwidth and reliability. The dipole element is welded to the boom to ensure low intermodulation performance and maximum durability. The passive elements are through mounted to the circular boom section and welded at each side to further minimise the potential for both corrosion and generation of intermodulation products. The alodined protective finish provides a conductive surface to ensure effective earthing of the antenna when mounting. Constructed with 2 to 16 elements, YB Series yagi antennas offer a choice of gain and beamwidth characteristics and can be configured in stacks or bays for higher gain applications in either horizontally or vertically polarised systems. Termination is via an 'N' female coaxial connector fitted to a short Durathene cable tail. Durathene polyethylene jacketed cable provides superior resistance to weathering and abrasion and is less susceptible to bird attack than standard PVC sheathed cables. This yagi antenna rests at ground potential to provide excellent lightning protection and reduced precipitation static noise.
- Fully welded 6 element construction
- Narrow beamwidth & high front to back ratios effective in reducing interference
- Can be configured in stacks or bays for higher gain applications
- Short low loss cable tail with N-female connector
- Australian designed & manufactured.
|Network Compatibility ||Yes/No ||Gain |
|UHF 400-420MHz||9dBd (11.15dBi) |
Electrical Specifications Frequency Range: 400-420MHz Input Impedance: 50Ω VSWR: <1.5:1 (14dB) Vertical Beamwidth: 47 degrees Horisontal Beamwidth: 56 degrees Front to Back Ratio: >18dB Passive IM 3rd Order (2x20W) dBc: please enquire Radiation: Directional Maximum Power: 100Watts
Mechanical/Environmental Specifications Construction: Fully welded aluminium, alodined finish Cable: Short 9008 Durathene tail Connector: N Female Mount: None Supplied - Recommend UNV Clamp Wind rating: >240km/hr Weight: 0.7kg Dimensions: 900mm (L)
What connection does this antenna have?
This antenna has an N Female connector for attaching your required length of cable.
N Female Connector