RFI 12dBi YB806 Optus/ISM Yagi Antenna

  • Fully welded construction for maximum performance and reliability
  • Extremely durable, long MTBF
  • Can be configured in stacks or bays for higher gain applications
  • Short low loss cable tail with N-female connector
  • Australian manufactured and warrantied.

Typical Usage

This is a very high quality antenna designed for applications requiring high performance, low passive inter-modulation, and very low VSWR. This type of antenna is typically deployed in 3G/ISM M2M control applications such as smart metering, water monitoring, etc. The YB809 Series are high gain Low PIM yagi antennas which provide excellent point to point communications in RF control, short or long haul link, point to multipoint and other applications calling for highly directional antennas. YB809 Series antennas exhibit narrow beamwidths (comparatively) and high front to back ratios to help minimise any potential interference to and from other systems The feed element of each antenna is of full folded dipole construction, welded to the mounting boom for maximum bandwidth, low intermodulation performance and reliability. The passive elements are through mounted to the circular boom section and welded at each side before plating. The alodine protective finish provides a conductive surface to ensure effective earthing of the antenna when mounting.
Network Compatibility
Yes/No
Gain
Optus 3G (900 MHz)
compatible
12 dBi
Vodafone 3G (900 MHz)
compatible
12 dBi
LPWAN/ISM (915 MHz)
compatible
12 dBi

Electrical Specifications

Frequency Range: 890 to 960 MHz Input Impedance: 50 Ω VSWR: <1.5:1 Vertical Beamwidth: 41° Horisontal Beamwidth: 48° Front to Back Ratio: >15 dB Radiation: Directional Maximum Power: 100 Watts

Mechanical/Environmental Specifications

Construction: Fully welded aluminium, alodined finish Cable: Short 9302 Durathene tail Input Connector: N Female Mount: None Supplied - Recommend RFI UNV Clamp Wind rating: 240 km/h Weight: 0.5 kg Dimensions: 1000 mm (L)
Read More

What connection does this antenna have?

This antenna has an N Female connector for attaching your required length of cable. You can use the dropdown box below to select how much cable you would like to purchase. You'll notice all cables in the dropdown box end with a FME connector - this is the connector used to attach your patch lead or mobile phone cradle. If you need something else or a different length, please use the Cables menu.

n female connector
N Female Connector

(YB809-94)

SKU YB809-94
Shipping Weight 0.0450kg
Shipping Width 0.170m
Shipping Height 0.080m
Shipping Length 0.950m