RFI 12dBi YB809 Telstra Yagi Directional Antenna
- Fully welded construction for maximum performance and reliability
- Extremely durable, long MTBF
- Can be configured in stacks or bays for higher gain applications
- Short low loss cable tail with N-female connector
- Australian manufactured and warrantied.
Typical UsageThis is a very high quality antenna designed for applications requiring high performance, low passive inter-modulation, and very low VSWR. This type of antenna is typically deployed in 3G M2M control applications such as smart metering, water monitoring, etc. The YB809 Series are high gain Low PIM yagi antennas which provide excellent point to point communications in RF control, short or long haul link, point to multipoint and other applications calling for highly directional antennas. YB806 Series antennas exhibit narrow beamwidths (comparatively) and high front to back ratios to help minimise any potential interference to and from other systems The feed element of each antenna is of full folded dipole construction, welded to the mounting boom for maximum bandwidth, low intermodulation performance and reliability. The passive elements are through mounted to the circular boom section and welded at each side before plating. The alodine protective finish provides a conductive surface to ensure effective earthing of the antenna when mounting.
|Telstra Next-G™ (850MHz)|
|Vodafone 4G+ Network (850MHz)* *Please check Vodafone Coverage Map|
Electrical SpecificationsFrequency Range: 806-896MHz Input Impedance: 50Ω VSWR: <1.5:1 (14dB) Vertical Beamwidth: 41 degrees Horizontal Beamwidth: 48 degrees Front to Back Ratio: >16dB Passive IM 3rd Order (2x20W) dBc: <-150 Radiation: Directional Maximum Power: 100Watts
Mechanical/Environmental SpecificationsConstruction: Fully welded aluminium, alodined finish Cable: Short 9302 Durathene tail Connector: N Female Mount: None Supplied - Recommend RFI UNV Clamp Wind rating: 240km/hr Weight: 0.7kg Dimensions: 900mm (L)