RFI 6dBi and 8dBi Directional Multiband Panel Antenna

Key Features

• Supplied with 10m low loss extension cable terminated with SMA male connector

• 6dBi gain @ 698-960 MHz; 8dBi gain @ 1710-2170, 2300-2700 & 3500-3800 MHz

• IP65 rated housing suitable for either indoor or outdoor installation

• Includes pole mount and wall mount brackets

• N-Type female connector (connects to the 10m SMA extension lead).

Usage

• RFI is an internationally renowned antenna manufacturer, specialising in products of the highest quality for commercial and industrial applications

• This single polarity antenna is recommended for select applications only, and is future proof supporting 824-960,1710-2170, 2300-2700 & 3500-3800 MHz to offer compatibility to all network operators.

• The antenna is supplied as a ready to install kit that includes:

  • the antenna

  • both wall and pole mounting brackets

  • installation instructions and a 10m extension cable fitted with an SMA male connector to suit most desk mounted wireless broadband devices.

Specifications / Frequency

Australian Network Compatibility	Yes/No	Gain
Telstra Next-G™ (850MHz)		6.1dBi
Telstra Cat M1™ (700MHz)		6.1dBi
Vodafone 4G (850MHz)* *Please check Vodafone Coverage Map.		6.1dBi
Optus Regional 3G (900MHz)* *Please check Optus Coverage Map.		6.1dBi
All carriers - calls & text (900MHz)		6.1dBi
Telstra 4G (1800MHz)		7.1dBi
Optus 4G (1800MHz)		7.1dBi
All carriers - 3G internet (2100MHz)* Please check your network's Coverage Map.		7.1dBi
Optus 4G/Vivid Wireless (2300MHz)		7.1dBi
802.11 b/g/n WiFi (2400MHz)		7.1dBi
ISM & Bluetooth (2400MHz)		7.1dBi

Electrical Specifications

• Frequency Range: 824-960MHz/1710-2500MHz/ 3500-3800MHz

• Input Impedance: 50Ω

• VSWR: <1.5:1

• Vertical Beamwidth: 70 degrees

• Horizontal Beamwidth: 72 degrees

• Polarisation: Vertical

• Radiation: Directional

• Maximum Power: 25Watts

Mechanical/Environmental Specifications

• Cable: 10m RG58

• Connector: N Female

• Weight: 0.45kg

• Dimensions: 177 x 45 x 207mm (L x W x H)

Connection

• This antenna is terminated with a N Female connector and is also supplied with a 10m cable that terminates with an SMA Male connector

• The N Female connector hard wired onto the antenna is designed specifically for attaching extension cables

• If 10m of cable is enough you can use the appropriate patch lead (make sure it has a SMA Female connector) to connect to your modem

• If using this antenna with a mobile phone you will probably need an SMA to FME adaptor to attach your phone's patch lead or cradle.

Read more

• Specification Sheet

• Installation Instructions