RFI COL2194 Pole Mounted Collinear Antenna - Receives signal from any direction - Ideal for fringe and rural areas - Simple installation.

Is this the right antenna for me?

This multi-purpose antenna is most often used as a high quality roof mounted antenna to improve poor signal inside the home, but also regularly used as a durable marine antenna for using your mobile phone or wireless broadband offshore. The COL2194 is a brilliant solution to slow wireless broadband or poor phone reception in suburban areas, or anywhere where signal is poor inside but fine outside the house. If you've ever taken your mobile on to the roof of your house you've probably noticed that signal is much better - roof mounting an antenna takes advantage of this naturally stronger signal and passes it down it's 10m cable to be connected to your phone or modem. Stay connected on the water by using this antenna with your mobile phone and wireless broadband modem. The antenna can be mounted to your mast or side rails by O-ring clamps that are provided and is supplied with 10m of cable to run inside your boat to your mobile phone or wireless broadband modem. At 700mm long and a receiving angle of 31 degrees to account for sway, this antenna is the right choice for mast mounting. Supplied with 10m RG-58 cabling, 2x Stainless steel hose clamps, and an SMA Male to FME Female adapter.

Network Compatibility
Yes/No
Gain
Telstra Next-G™ (850MHz)
compatible
5.5dBi
New Vodafone Network (850MHz)* *Please check Vodafone Coverage Map.
compatible
5.5dBi
Optus Regional 3G (900MHz)* *Please check Optus Coverage Map.
compatible
5.5dBi
All carriers - calls & text (900MHz)
compatible
5.5dBi
915MHz ISM Band
compatible
5.5dBi
Telstra 4G (1800MHz)
compatible
3dBi
Optus 4G (1800MHz)
compatible
3dBi
All carriers - 3G internet (2100MHz)* Please check your network's Coverage Map.
compatible
3dBi

Electrical Specifications

Frequency Range: 824-960MHz & 1710-2170MHz Input Impedance: 50Ω VSWR: <2.5:1 Polarisation: Vertical Radiation: Omnidirectional Vertical Beamwidth: 31° & 57° Maximum Power: 50Watts

Mechanical/Environmental Specifications

Construction: Fibreglass radome, PCB Radiator. Cable: 10m RG58 Connector: FME Female Length: 73.5cm Weight: 0.572kg

Read More

What connection does this antenna have?

This antenna has a 10m cable that terminates with an FME Female connector. The FME Female connector is the most common type of connector for mobile antennas and mates with the FME Male connector found on patch leads and phone cradles. It is also supplied with an SMA Male to FME Male adapter, allowing the antenna to be attached to many wireless gateways and hubs.

If you would like a shorter length of cable, or a different connector please send us an email and we can customise this antenna for you.

female FME Connector

FME Female Connector

FME Male to SMA Male Adapter

RFI wireless logo

(COL2194)

SKU COL2194
Shipping Weight 1.9000kg
Shipping Width 0.100m
Shipping Height 0.100m
Shipping Length 0.700m