RFI COL7195 3G+4G+4GX Collinear Antenna

  • Multiband 700-2700MHz
  • Cutting edge printed circuit board design
  • Supplied with 10m low loss coaxial cable, with female FME connector.

The evolution continues with the release of the COL7195 4G LTE cellular mobile antenna. In response to the lightning fast roll-out of Telstra 4GX and Optus 4G+ services nation wide, Telco approached RFI to design a vehicle mounted antenna capable of operating on the new 700MHz LTE network. Part of the challenge was also to improve gain on regular 1800MHz 4G services, and provide some operation on the new 2600MHz network to ensure the antenna would remain futureproof for Cat-11 LTE devices capable of providing 450-600Mbps by aggregating 700+1800+2600MHz bands together. Like the COL2195, the secret to it’s outstanding performance lies in the use of the patented Meander™ radiating elements. These Meander™ circuits are coupled together to deliver extraordinary consistency in gain, coverage pattern and bandwidth. The result is a unique antenna able to operate across all mobile phone networks globally, housed in the one unit. The COL7195 provides an impressive 6.5dBi gain on lower bands such as 3G, Next-G, and 4GX, as well as a modest 4.5dBi gain on regular 4G bands. It's important to note this antenna does not provide MIMO, if you require the best possible Internet performance you should use two antennas, separated by around 300mm.

Is this antenna right for me?

This multi-purpose antenna is most often used as a high quality roof mounted antenna to improve poor signal inside the home, but also regularly used as a durable marine antenna for using your mobile phone or wireless broadband offshore. The COL7195 is a brilliant solution to slow wireless broadband or poor phone reception in suburban areas, or anywhere where signal is poor inside but fine outside the house. If you've ever taken your mobile on to the roof of your house you've probably noticed that signal is much better - roof mounting an antenna takes advantage of this naturally stronger signal and passes it down it's 10m cable to be connected to your phone or modem. Supplied with 10m RG-58 cabling, 2x Stainless steel hose clamps, and an SMA Male to FME Female adapter.

Network Compatibility
Yes/No
Gain
Telstra 4GX (700MHz)
compatible
6.5dBi
Optus 4G+ (700MHz)
compatible
6.5dBi
Telstra Next-G™ (850MHz)
compatible
6.5dBi
Vodafone 4G+ (850MHz)* *Please check Vodafone Coverage Map
compatible
6.5dBi
Optus Regional 3G (900MHz)* *Please check Optus Coverage Map.
compatible
6.5dBi
Vodafone Regional 3G (900MHz)* *Please check Vodafone Coverage Map.
compatible
6.5dBi
Telstra/Optus/Voda 4G (1800MHz)
compatible
4.5dBi
All Carriers - Urban/Metro 3G (2100MHz)
compatible
4.5dBi
Optus 4G TDD (2300MHz)
compatible
5.5dBi
Telstra 4GX (2600MHz)
compatible
5.5dBi

Electrical Specifications

Frequency Range: 698-960MHz / 1710-2170MHz / 2300-2700MHz Input Impedance: 50Ω VSWR: <2.5:1 Polarisation: Vertical Radiation: Omnidirectional Vertical Beamwidth: 21° / 40° / 25° Maximum Power: 10Watts

Mechanical/Environmental Specifications

Construction: Fibreglass radome, PCB Radiator, Aluminium mounting tube Cable: 10m Cellfoil 9006 low loss coaxial Connector: FME Female Length: 965mm Weight: 0.572kg

Read More

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

What connection does this antenna have?

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

This antenna has a 5m cable that terminates with an FME Female connector. The FME Female connector is the most common type of connector for mobile antennas and mates with the FME Male connector found on patch leads and phone cradles.

 

 

 

 

 

 

 

female FME Connector

 

 

 

 

 

 

 

FME Female Connector

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

If you would like a shorter length of cable, or a different connector please send us an email and we can customise this antenna for you.

 

 

 

 

 

 

 

RFI wireless logo

 

 

 

 

 

 

(COL7195)

SKU COL7195
Shipping Weight 1.6000kg
Shipping Width 0.100m
Shipping Height 1.200m
Shipping Length 0.100m