RFI Omnidirectional 2G/3G/4G MIMO Antenna

  • Wideband 800-2700MHz
  • IP64 Waterproof
  • Two dipoles, 1x +45 and 1x -45 degrees.

This omnidirectional LTE MIMO antenna provides an innovative and future proof solution for 4G / 3G and 2G networks and is ideal for those seeking increased signal and hence faster, more reliable data speeds on today’s modern 4G networks. It incorporates two separately fed ultra-wideband elements in a single housing which provides basic MIMO diversity for the networks of today and tomorrow. Supporting suburban/urban LTE bands used in carrier aggregation (1800, & 2600MHz), this antenna will support LTE-A in the years to come. It's important to note however that this antenna does not cover the 700MHz 4GX network. The weatherproof housing is designed for window (suction), pole and wall mounting and has dual 5m low loss cables terminated with SMA male connectors. If you require longer cables you can select the N-Female connector option to allow connecting antenna extension cables.

...
Network Compatibility
Yes/No
Gain
Telstra Next-G™ (850MHz)
compatible
1.4dBi
New Vodafone Network (850MHz)* *Please check Vodafone Coverage Map.
compatible
1.4dBi
Optus Regional 3G (900MHz)* *Please check Optus Coverage Map.
compatible
1.4dBi
All carriers - calls & text (900MHz)
compatible
1.4dBi
Telstra 4G (1800MHz)
compatible
2dBi
Optus 4G (1800MHz)
compatible
2dBi
Vodafone 4G (1800MHz)
compatible
2dBi
All carriers - 3G internet (2100MHz)* Please check your network's Coverage Map.
compatible
3dBi
LTE Bands 5, 6, 8, 18 - 20, (790-960MHz)
compatible
2dBi
LTE Bands 1 - 4, 9, 10, 15, 16, 23, 25, 33 - 37, 39, (1710-2170MHz)
compatible
2dBi
LTE Bands 7, 38 (2500-2690MHz)
compatible
4.5dBi

Electrical Specifications

Frequency Range: 790–960 / 1710–2170 / 2500–2690MHz Input Impedance: 50Ω VSWR: <1.8:1 / <1.6:1 / <1.3:1 Polarisation: X-Pol 45/135° Vertical Beamwidth: 80° (varies with band) Radiation: Omnidirectional (Directional X-Pol) Maximum Power: 10Watts Isolation: >17dB / >12dB / >17dB

Mechanical/Environmental Specifications

Cable: 2x 5m LMR195 Connector: 2x SMA Male or 2x N Female (your choice) Wind Rating: 200km/hr Temperature: -40°C +70°C Mounting: Window (suction), wall or pole Weight: 700g Dimensions: 240 x 135 x 105 (L x W x H)

Read More

 

What connection does this antenna have?

 

You can choose between 5m cables terminating with SMA Male connectors, or short 30cm leads with an N Female connectors. If 5m of cable is enough you can use the appropriate patch lead (make sure it has a SMA Female connector) to connect to your modem. If using this antenna with a mobile phone you will probably need an SMA to FME adapter to attach your phone's patch lead or cradle.

If you need to use more cable, or are using it on 4G, you'll need to select the N Female connector option so you can attach a super low loss cable (which have N Male connectors).

SMA male connector

Option 1. 2x SMA Male Connectors

n female connector

Option 2. 2x N Female Connectors

 

(LTE-XPOL-001)

SKU LTE-XPOL-001
Shipping Weight 0.0450kg
Shipping Width 0.180m
Shipping Height 0.100m
Shipping Length 0.260m