Stainless Steel Cable Braid - 20m Roll

 

Key Features

 

  • Grade 304 stainless steel

  • High coverage, flexible sleeving

  • 20mm inner diameter

  • Typical stock levels 500-1000m.

 

Pricing

 

  • Pricing is structured per roll. Please contact us for multi-roll and volume pricing.

 

Protecting your investment

 

  • Bird proofing is an important consideration where there is a likelihood of RF feeders and connector weatherproofing being attacked and damaged by birds, or other animals

  • Galahs, Cockatoos and Corellas are the primary culprits observed to cause damage to feeder equipment

  • Critical Ethernet and coaxial communications run in many industrial facilities are at risk of attack from rodents known to chew PVC and PE cable jackets

  • Cables with an outer diameter less than 1/2", such as Cat5/6 Ethernet, RG58, LMR195, and LMR400, are at particular risk

  • Stainless steel cable ties are recommended for use in high risk areas.

 

RF Shielding

 

  • While many high quality coaxial and Ethernet cables have a good level of shielding from nearby RF sources, stainless braiding can be used to add another layer of protection against EMI/RFI coupling and crosstalk

  • It is particularly useful in applications where communications run parallel with power or other unshielded cables.

 

Installation note

 

  • Stainless steel braid must be isolated from making contact with other metallic components

  • Contact or rubbing against a metal surface may result in PIM interference

  • It is important that stainless steel braiding not be installed on the antenna tail, within proximity of the antenna, or in the path of the centre lobe.

 

(SSB020-20)

SKU SSB020-20
Shipping Weight 0.0450kg
Shipping Width 0.100m
Shipping Height 0.200m
Shipping Length 0.100m
Shipping Cubic 0.002000m3