Ubiquiti Bullet Titanium M5 Point-to-Point Wireless Bridge
- Turn any 5.8GHz antenna into a PtP or PtMP bridge
- Connect two remote locations on the one network
- Share Internet connection between buildings, remote sites, etc
- Up to 600mW output power, +100Mbps capable
- POE Injector & 240V AC Adapter included.
What is the Bullet Titanium Version?The Bullet M5 Titanium features a tough weatherproof design. Made from aircraft-grade aluminum, the casing is designed to withstand nature’s harshest elements. The Bullet M Titanium is engineered to survive extreme conditions. Featuring an upgraded aluminum casing, weatherproof N-Type connection gasket, and water-tight cable gland, the Bullet M2 Titanium is virtually bullet-proof The Ubiquiti Bullet Titanium eliminates the need to use RF cables and requires no special antenna or tools to install. No radio card/host board issues. No RF cable quality concerns. No mechanical stability concerns. No enclosure mounting requirements. With the Bullet M5 Titanium, operators can just plug and go. This is a transparent data-link layer bridge, not a routed bridge - this means that you are creating a virtual ethernet cable between the two facilities, making network setup incredibly simple - no routing configuration, all protocols (DHCP, DNS, etc) just work. Management of the Ubquiti device couldn't be easier with SSH and SNMP protocol support, as well as a very intuitive HTTP interface. The units are powered via Power over Ethernet (PoE) - simply plug one end of the Ethernet cable into the Bullet, and the other into the PoE Injector (which is plugged into AC power). This allows one cable to both power the unit and also carry network traffic. We recommend using Cat6 Outdoor UV Shielded Cable with this product.