Ubiquiti Rocket M2 (2.4GHz) 802.11n WiFi AP & PtP Wireless Bridge
- Carrier grade base station radio
- Connect multiple remote locations on the one network (+50km possible)
- Share Internet connection between buildings, remote sites, etc
- Up to 600mW output power, +300Mbps 802.11n 2x2MIMO capable
- 24VDC POE Injector & 240V AC Adapter included.
Rocket M series are a rugged, hi-power, very linear 2x2 MIMO radio with enhanced receiver performance. It features incredible range performance (50+km) and breakthrough speed (150+Mbps real TCP/IP). Rocket combines the “brains” in one robust unit; allowing it to be paired with any 2.4GHz (M2) WiFi antenna on the market. This versatility gives network architects unparalleled flexibility and convenience.
While Rocket is capable of some amazing things, the M2 model is typically coupled with omnidirectional antennas to provide high powered 802.11n WiFi access in a 360 degree range. Unlike the UniFi AP-Outdoor, this unit does not require a controller and is configured using only it's integrated HTTP interface. For sectorised WiFi coverage, the NanoStation series are the preferred option.
High Speed Network Sharing
This is a transparent data-link layer bridge, not a routed bridge - this means that you are creating a virtual ethernet cable between the two facilities, making network setup incredibly simple - no routing configuration, all protocols (DHCP, DNS, etc) just work. Management of the Ubiquiti device couldn't be easier with SSH and SNMP protocol support, as well as a very intuitive HTTP interface.
The units are powered via Power over Ethernet (PoE) - simply plug one end of the Ethernet cable into the Rocket, and the other into the PoE Injector (which is plugged into AC power). This allows one cable to both power the unit and also carry network traffic. We recommend using Cat6 Outdoor UV Shielded Cable with this unit.
Setup Guides (Click Image)