Andrew Universal 1/2", 7/8", and 1-5/8" Cable Grounding Kit

  • Mid-span framework grounding
  • Genuine Andrew/Commscope Earthing Kit
  • Outer conductor only.
This cable grounding kit is designed to provide a secure grounding point to the outer conductor of all feeder cable series between 1/2" and 1-5/8" OD using a mechanical clamping method. Suitable for both corrugated and smoothwall, as well as elliptical waveguide 63 through 180 and FiberFeed Hybrid cables. Cable runs should be attached to a good electrical ground at the top of the tower near the antenna, at the bottom of the tower, and at the point where the cable enters the transmitter building. If the tower is used as a broadcast radiator, only ground the cable at the first quarter wavelength point, (broadcast frequency) measured vertically from the base of the tower.

Electrical Specifications

Current Handling: Tested to withstand 100,000 amps peak current surge Current Handling Test Method: MIL-STD-1757 Grounding, Bonding and Shielding Test Method: MIL-STD-188-124A Lightning Protection Test Method: IEC 1024-1
Read More
commscope andrew logo

(UG12158-15B4-T)

SKU UG12158-15B4-T
Shipping Weight 0.0450kg
Shipping Width 0.130m
Shipping Height 0.070m
Shipping Length 0.170m