ZCG Scalar ZN3-SGDB Heavy Duty 6.2dBi Bullbar Antenna
- Covers both Telstra Next-G and Optus/Vodafone 900MHz at 6.2dBi
- All other networks (3G 2100MHz and 4G) at 3dBi
- Removable whip for safe storage
- Heavy duty spring & radome, full brass radiator design
- 100% Australian made.
Typical UsageZCG Scalar bullbar antennas are designed with solid copper radiating elements, designed to last on even the toughest of corrugated roads. You'll typically see RFI brand antennas on fleet and emergency vehicles in regional and rural areas, but if you frequent unsealed roads or rough terrain ZCG's bullbar antenna series are the preferred option. The ZN3-SGDB antenna's solid brass internals are practically unbreakable, where as circuit-board designs can fracture with extended use on extremely rough terrain.
InstallationThe high quality electro-polished stainless steel barrel spring dampens vibrations while travelling. 5 metres of RG58 low loss cable side exits from the aluminium mount ferrule, pre-terminated with an FME Female connector for attaching to your cradle or patch lead. To install, simply secure the antenna firmly into any bracket with a 13mm (½”) minimum diameter hole using the bolt and washer provided. The typical mounting point for this model is to a vehicle bull bar, but many other mounting options are available with our extensive range of vehicle brackets. Australian Network Compatibility
|Telstra Next-G™ (850MHz)|
|New Vodafone Network (850MHz)* *Please check Vodafone Coverage Map.|
|Optus Regional 3G (900MHz)* *Please check Optus Coverage Map.|
|All carriers - calls & text (900MHz)|
|Telstra 4G (1800MHz)|
|Optus 4G (1800MHz)|
|All carriers - 3G internet (2100MHz)* Please check your network's Coverage Map.|
Electrical SpecificationsFrequency Range: 824-960MHz & 1710-2170MHz Input Impedance: 50Ω VSWR: <1.6:1 Polarisation: Vertical Radiation: Omnidirectional Vertical Beamwidth: 32° & 57° Maximum Power: 30Watts
Mechanical/Environmental SpecificationsConstruction: Fibreglass radome, brass radiating elements, aluminium ferrule, electro-polished stainless steel barrel spring Cable: 5m RG58 coaxial Connector: FME Female Length: 1200mm Weight: 1.3kg
What connection does this antenna have?
This antenna has a 5m cable that terminates with an FME Female connector. The FME Female connector is the most common type of connector for mobile antennas and mates with the FME Male connector found on patch leads and phone cradles.
If you would like a shorter length of cable, or a different connector please send us an email and we can customise this antenna for you.