Optus Cel-Fi Pro - Smart Repeater for 3G & 4G
Key Features
-
Minimise dead zones and reduce dropped calls
-
Simple three step installation - no cabling or configuring required
-
Supports 3G 900/2100MHz, 4G 1800/2600MHz
-
Locked to the Optus network
-
External antenna port (SMA Female).
Usage
-
The Mobile Smart Repeater for Optus is a convenient solution to poor indoor 3G/4G phone coverage
-
Installing this device in your home can improve the reliability of phone calls, text messages, and increase 4G mobile broadband signal
-
For areas with poor outdoor coverage, this model has an external antenna connector to allow the connection of a larger antenna
-
The unit will rebroadcast signal throughout the building allowing nearby mobile phones to automatically receive stronger signal - no pairing, no fiddling about.
Supported Carriers
-
Optus
-
Virgin
-
TPG
-
Amaysim
-
iiNet
-
Other Optus MVNO Resellers.
A heads up - don't get caught buying an unlicensed repeater in Australia
- It's buyer beware when it comes to purchasing a repeater
- In Australia, repeaters must be licensed to operate by a carrier - if unlicensed, the repeater is illegal to use and attracts harsh penalities, including substantial fines and possible jail time
- Many mobile service providers do not support the use of personal repeaters on their network, due to incorrect set-up and the interference they can cause when connected to the network.
Maximum coverage and network friendly
-
The Cel-Fi system is the only personal repeater that is widely approved by carriers in Australia
-
The smart repeater system is very different to a standard repeater. It's designed to provide maximum coverage, be network friendly, and can be easily installed by the end user.
How does it work?
The Cel-Fi system:
-
continuously monitors power levels of the cell tower it is connected to, constantly adjusting its output power to suit
-
amplifies and disburses a particular carrier’s mobile signal, operating within a set frequency band - this means the service provider can shut down the repeater remotely if needed by using a signal from the base station
-
does not interfere with the carrier’s network or other users on the network
-
has a unique installation process to eliminate feedback into the mobile network.
Optus Requirements - Mobile Smart Repeater
-
As the device is an actively boosted radio transmitter, it is subject to regulatory requirements
-
We will also perform a check of the area upon ordering and may contact you if we have further questions.
Read More
(CELFI-PRO-OPT)
SKU | CELFI-PRO-OPT |
Shipping Weight | 1.0000kg |
Shipping Width | 0.100m |
Shipping Height | 0.200m |
Shipping Length | 0.200m |
Shipping Cubic | 0.004000000m3 |