RFI 8.5dBi Folding Antenna Kit - Marine

Key Features

• Manufactured by internationally renown antenna manufacturer, RFI, the CDQ7199 is a durable antenna designed for outdoor use

• Consistently achieves an impressive gain across all Australian mobile networks

• White construction blends in with your other Marine Antennas

• The kit includes a stainless steel swivelling ratchet mount and 13mm chrome adaptor, allowing easy attachment and removal of the high gain antenna

Usage

• As a rule of thumb: the higher the dBi, the flatter the angle the antenna can receive signal

• The CDQ7199's 8.5dBi gain means that this antenna setup is perfect for usage offshore

• The CDQ7199 has been primarily deisgned to suit the low band 3G & 4G frequencies that will be available offshore but the Antenna is also tuned to pick up all of the high band 3G & 4G frequencies when you are in the Harbour or Near Shore.

• We have had customers report the antenna provides servicability out to 100km o

Specifications / Frequency

Network Compatibility Yes/No Gain Telstra 4GX (700MHz) 8.5dBi Optus 4G+ (700MHz) 8.5dBi Telstra Next-G™ (850MHz) 8.5dBi Vodafone 4G+ (850MHz)* *Please check Vodafone Coverage Map 8.5dBi Optus Regional 3G (900MHz)* *Please check Optus Coverage Map. 8.5dBi Vodafone Regional 3G (900MHz)* *Please check Vodafone Coverage Map. 8.5dBi Telstra/Optus/Voda 4G (1800MHz) 4.5dBi All Carriers - Urban/Metro 3G (2100MHz) 4.5dBi Optus 4G TDD (2300MHz) 5.5dBi Telstra 4GX (2600MHz) 5.5dBi

Electrical Specifications

• Frequency Range: 698-960MHz / 1710-2170MHz / 2300-2700MHz

• Input Impedance: 50Ω

• VSWR: <2.5:1

• Polarisation: Vertical

• Radiation: Omnidirectional

• Vertical Beamwidth: 15° / 15° /20°

• Maximum Power: 10Watt

Mechanical/Environmental

• Construction: Fibreglass radome, PCB Radiator, black electro-polished stainless steel spring

• Cable: 5m Cellfoil 9006 low loss coaxial

• Connector: FME Female

• Length: 2080mm

• Weight: 1.7kg

Connection

This product requires a patch lead to connect to your device. Please select one from the Patch Leads menu or the dropdown box below.

• This antenna has a 5m cable that terminates with an FME Female connector

• The FME Female connector is the most common type of connector for mobile antennas and mates with the FME Male connector found on patch leads and phone cradles.

FME Female Connector [pictured]

• Please contact us if you would like a shorter length of cable, or a different connector,  and we will customise this antenna for you.

A heads up!

• This product is over 1200mm long and can only be delivered by courier and not Australia Post - please leave an appropriate address for a signatory.