RFI COL2194 Pole Mounted Collinear Antenna


Key Features


  • Receives signal from any direction

  • Ideal for fringe and rural areas

  • Simple installation.




  • This multi-purpose antenna is mostly used as a high quality roof mounted antenna to improve poor signal inside the home

  • It's also regularly used as a durable marine antenna for using your mobile phone or wireless broadband offshore

  • The COL2194 is a brilliant solution to slow wireless broadband or poor phone reception in suburban areas, or anywhere where signal is poor inside but fine outside the house

  • If you've ever taken your mobile on to the roof of your house you've probably noticed that signal is much better - roof mounting an antenna takes advantage of this naturally stronger signal and passes it down its 10m cable to be connected to your phone or modem

  • Stay connected on the water by using this antenna with your mobile phone and wireless broadband modem

  • The antenna can be mounted to your mast or side rails by O-ring clamps that are provided and is supplied with 10m of cable to run inside your boat to your mobile phone or wireless broadband modem

  • At 700mm long and a receiving angle of 31 degrees to account for sway, this antenna is the right choice for mast mounting.


Supplied with 10m RG-58 cabling, 2x Stainless steel hose clamps, and an SMA Male to FME Female adapter.


Specifications / Frequency


Network Compatibility
Telstra Next-G™ (850MHz)
New Vodafone Network (850MHz)* *Please check Vodafone Coverage Map.
Optus Regional 3G (900MHz)* *Please check Optus Coverage Map.
All carriers - calls & text (900MHz)
915MHz ISM Band
Telstra 4G (1800MHz)
Optus 4G (1800MHz)
All carriers - 3G internet (2100MHz)* Please check your network's Coverage Map.


Electrical Specifications


  • Frequency Range: 824-960MHz & 1710-2170MHz

  • Input Impedance: 50Ω

  • VSWR: <2.5:1

  • Polarisation: Vertical

  • Radiation: Omnidirectional

  • Vertical Beamwidth: 31° & 57°

  • Maximum Power: 50Watts


Mechanical/Environmental Specifications


  • Construction: Fibreglass radome, PCB Radiator

  • Cable: 10m RG58

  • Connector: FME Female

  • Length: 73.5cm

  • Weight: 0.572kg




  • This antenna has a 10m cable that terminates with an FME Female connector

  • The FME Female connector is the most common type of connector for mobile antennas and mates with the FME Male connector found on patch leads and phone cradles

  • It is also supplied with an SMA Male to FME Male adapter, allowing the antenna to be attached to many wireless gateways and hubs

  • If you would like a shorter length of cable, or a different connector please send us an email and we can customise this antenna for you.

female FME Connector

FME Female Connector

FME Male to SMA Male Adapter

RFI wireless logo


Brand RFI
Shipping Weight 1.9000kg
Shipping Width 0.100m
Shipping Height 0.100m
Shipping Length 0.700m
Shipping Cubic 0.007000000m3