RFI Omnidirectional 2G/3G/4G MIMO Antenna

Key Features

• Wideband 800-2700MHz

• IP64 Waterproof

• Two dipoles, 1x +45 and 1x -45 degrees.

Usage

• This omnidirectional LTE MIMO antenna provides an innovative and future proof solution for 4G / 3G and 2G networks and is ideal for those seeking increased signal and hence faster, more reliable data speeds on today’s modern 4G networks

• It incorporates two separately fed ultra-wideband elements in a single housing which provides basic MIMO diversity for the networks of today and tomorrow. Supporting suburban/urban LTE bands used in carrier aggregation (1800, & 2600MHz), this antenna will support LTE-A in the years to come

• The weatherproof housing is designed for window (suction), pole and wall mounting and has dual 5m low loss cables terminated with SMA male connectors

• If you require longer cables you can select the N-Female connector option to allow connecting antenna extension cables.

A heads up!

• This antenna does not cover the 700MHz 4GX network.

Specifications / Frequency

Network Compatibility	Yes/No	Gain
Telstra Next-G™ (850MHz)		1.4dBi
New Vodafone Network (850MHz)* *Please check Vodafone Coverage Map.		1.4dBi
Optus Regional 3G (900MHz)* *Please check Optus Coverage Map.		1.4dBi
All carriers - calls & text (900MHz)		1.4dBi
Telstra 4G (1800MHz)		2dBi
Optus 4G (1800MHz)		2dBi
Vodafone 4G (1800MHz)		2dBi
All carriers - 3G internet (2100MHz)* Please check your network's Coverage Map.		3dBi
LTE Bands 5, 6, 8, 18 - 20, (790-960MHz)		2dBi
LTE Bands 1 - 4, 9, 10, 15, 16, 23, 25, 33 - 37, 39, (1710-2170MHz)		2dBi
LTE Bands 7, 38 (2500-2690MHz)		4.5dBi

Electrical Specifications

• Frequency Range: 790–960 / 1710–2170 / 2500–2690MHz

• Input Impedance: 50Ω

• VSWR: <1.8:1 / <1.6:1 / <1.3:1

• Polarisation: X-Pol 45/135°

• Vertical Beamwidth: 80° (varies with band)

• Radiation: Omnidirectional (Directional X-Pol)

• Maximum Power: 10Watts

• Isolation: >17dB / >12dB / >17dB

Mechanical/Environmental Specifications

• Cable: 2x 5m LMR195

• Connector: 2x SMA Male or 2x N Female (your choice)

• Wind Rating: 200km/hr

• Temperature: -40°C +70°C

• Mounting: Window (suction), wall or pole

• Weight: 700g

• Dimensions: 240 x 135 x 105 (L x W x H)

Connection

• You can choose between 5m cables terminating with SMA Male connectors, or short 30cm leads with an N Female connectors

• If 5m of cable is enough you can use the appropriate patch lead (make sure it has a SMA Female connector) to connect to your modem

• If using this antenna with a mobile phone you will probably need an SMA to FME adapter to attach your phone's patch lead or cradle

• If you need to use more cable, or are using it on 4G, you'll need to select the N Female connector option so you can attach a super low loss cable (which have N Male connectors).

Read More

• Specification Sheet

• Installation Instructions