Optus 4G Huawei E5776 Patch Lead

 

Key Features

 

  • Connect your modem to an external antenna

  • 15cm of RG316 cable with a TS9 connector

  • Helps boost signal strength and speed of your 4G LTE device.

 

Why use an external antenna?

 

  • Next time you're out-and-about look around you - every day thousands of Australians use external antennas to enjoy fast, uninterrupted wireless broadband internet

  • If you're in a rural, hilly, low signal area, or you can't get a good signal indoors, there's no need to tear your hair out over slow mobile broadband crashing or dropping out half way, when an external antenna is often all you need.

 

What does a patch lead do?

 

  • Most antenna cables terminate with a standard connection, most commonly a female 'FME' connector

  • To plug an antenna into your phone or wireless modem, you need a short cable that acts as a conversion from the FME connector to the device-specific connector that will plug into the antenna port on your device.

 

Which connector type do I need?

 

  • We offer both the standard FME connector that you will find on 90% of antenna cables, and the less common SMA connector

  • The following images will help you identify which connector your antenna cable has, and consequently what patch lead you require

  • If you don't have an antenna, you can find what connector your antenna will have at the bottom of its description.



FME patch lead vs SMA patch cable

Read More

 

 

(TS9-E5776)

SKU TS9-E5776
Shipping Weight 0.0450kg
Shipping Width 0.050m
Shipping Height 0.050m
Shipping Length 0.300m
Shipping Cubic 0.000750000m3