Telco Omnidirectional Cross-Polar MIMO Antenna

 

Key Features

 

  • Tri-Phaser Dual-Polarisation Technology

  • Dual-polarised elements with high isolation

  • Compact weatherproof PVC radome

  • Carrier Aggregation ready

  • Wide spectrum design, suits all current and planned networks (including 700 MHz 4GX).

 

Usage

 

  • The new Telco XOMNI antenna series incorporates ground-breaking Tri-Phaser Technology to provide true orthogonally polarised transmissions on the full 360° horizontal axis

  • This allows your hardware to operate in true MIMO providing over 30dB of isolation between the two transmissions

  • Designed and produced to meet prescriptive specifications provided by major telecom operators, this compact antenna provides single port operation on lower band (698 to 960 MHz), and full MIMO on upper band (1710 to 2690 MHz)

  • This configuration ensures operation on all 3G and 4G networks worldwide, with very high MIMO performance on upper bands used in metro and urban areas

  • This is the only cross-polarised omnidirectional antenna on the market capable of covering Telstra and Optus' new 4GX and 4G+ 700 MHz (Band 28) and 2600 MHz (Band 7) networks, as well as standard 1800 MHz 4G (Band 3), all the while being backwards compatible on all 2G and 3G voice and data networks.

  • This antenna has been designed to resolve weak signal strength in urban and metro areas, where signal strength is good outdoors but weak indoors

  • As such a small antenna, despite its low gain, is often sufficient to provide a 10-20 dB improvement in signal strength by placement in an area where signal is naturally stronger

  • More important than signal strength is the quality of signal - the antenna has highly orthogonal transmission characteristics, allowing the two streams of data sent in MIMO to be received clearly without self-interference

  • This small unit has been designed for both indoor and outdoor operation, the high grade PVC radome means it can be permanently installed in outdoor locations using the supplied pole mount bracket as an unobtrusive and aesthetically pleasing solution

  • Mounting brackets and desktop stands are customisable upon consultation.

 

Specifications / Frequency

 

Network Compatibility
Yes/No
Gain
Telstra 4GX (700 MHz)
compatible
-0.5 dBi
Optus 4G+ (700 MHz)
compatible
-0.5 dBi
LTE Bands 12-14, 17, 28, 29, 44 (700 MHz)
compatible
-0.5 dBi
Telstra Next-G™ (850 MHz)
compatible
1.5 dBi
Vodafone 4G+ (850 MHz)* *Please check Vodafone Coverage Map
compatible
1.5 dBi
Optus Regional 3G (900 MHz)
compatible
2.2 dBi
Vodafone Regional 3G (900 MHz)
compatible
2.2 dBi
Telstra/Optus/Voda 4G (1800 MHz)
compatible
3.2 dBi
LTE Bands 2, 25, 35-37, 39 (1900 MHz)
compatible
3.9 dBi
LTE Bands 1, 33, 34 (2100 MHz)
compatible
4.3 dBi
All Carriers - Urban/Metro 3G (2100 MHz)
compatible
4.3 dBi
Optus 4G TDD (2300 MHz)
compatible
4.0 dBi
LTE-TDD Bands 40 (2300 MHz)
compatible
4.0 dBi
802.11 b/g/n/ac WiFi (2400 MHz)
compatible
3.9 dBi
LTE Band 41 (2500 MHz)
compatible
4.5 dBi
LTE Bands 7, 38 (2600 MHz)
compatible
4.4 dBi
Telstra 4GX Band 7 (2600 MHz)
compatible
4.4 dBi

 

Electrical Specifications

 

  • Frequency Range: 698 to 960 MHz / 1710 to 2700 MHz

  • Input Impedance: 50 Ω

  • VSWR: <2.0:1 / <1.5:1

  • Inter-Port Isolation: >25 dB

  • Polarisation: V & H

  • Vertical Beamwidth: See Specification Sheet

  • Radiation: Omnidirectional Maximum Power: 20 Watts

 

Mechanical/Environmental Specifications

 

  • Construction: PVC Radome, Aluminium Mounting Bracket, Stainless Fixings

  • Cable: none

  • Input Connector: 2x Integrated N-Type Female White Bronze

  • Wind Rating: 210 km/hr

  • Temperature: -40 °C to +60 °C

  • Weight: 0.53 kg (excludes bracket)

  • Dimensions: 150 x 116 mm (L x Ø)

  • Mounting: 25-48 mm Ø pole

 

This antenna has been laboratory tested in a certified 3D Anechoic Chamber. All electrical specification and performance listed has been produced from real-world test data, and not the product of computer simulation.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

telco fabrications engineer certified mount

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Connection

 

 

 

 

 

 

 

  N Flange panel mount connector

 

 

 

 

 

 

 

N Female Connector [pictured]

 

 

 

 

 

 

 

This antenna has two integrated N Female connectors at its base. There is no cable supplied.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

telco tri-phaser dual polarisation MIMO technology logo

 

 

 

 

 

 

 

(XOM-700-2700)

SKU XOM-700-2700
Brand Telco Antennas
Shipping Weight 0.0450kg
Shipping Width 0.160m
Shipping Height 0.160m
Shipping Length 0.220m
Shipping Cubic 0.005632m3