Telco Antennas Logo - mobile broadband antennas and aerials

Telstra Next-G Indoor Coverage - Repeater Kit for Remote Outback Areas

16dBi antenna kit and repeater for boosting poor phone coverage
SKU: TELSTRA-KIT-REMOTE
$1,399.00

Telstra Repeater Kit for Very Remote Locations
- Full service for up to 20 Telstra mobile phones or modems
- Boost Telstra coverage for any mobile phone wirelessly
- Suitable for Telstra, Boost, and Aldi Mobile networks
- Australia's only legal mobile phone repeater system
- Complete system including antenna, mounting kit, repeater, and all cables & connectors
- 30 day satisfaction guarantee.

The Mobile Smart Antenna for Telstra is a convenient solution to poor indoor Next-G phone coverage. Installing this device in your home can improve the reliability of phone calls, text messages, and increase 3G mobile broadband signal. Each repeater will provide full reception for up to 20 mobile phones, and allow 5 simultaneous phone calls.

Each Smart Repeater typically creates a 15-30m radius coverage area in normal home or office environments, with up to an impressive 70m radius in open areas such as supermarkets or farms as reported by our customers. Like all wireless systems coverage area is reduced by the signal having to travel through thick walls or floors so actual coverage area will vary depending on your unique situation.

This is a complete repeater system. The ultra high gain Telco 16dBi Yagi is the highest performing antenna in it's class and is perfectly suited to most western QLD, Northern Territory, and Western Australian areas where terrain is very flat and cell towers are often 40-80km from your location. This repeater kit was conceived to provide remote mine site buildings and accommodation camps with high speed wireless broadband and mobile phone service.

Having a 2.4m boom length, the fully welded aluminium 16dBi antenna requires a full bracing/anti-vibration kit and heavy duty pole mount. Very weak signal locations exhibiting extremely poor mobile coverage also require heavy duty LMR400 super low loss cable to ensure maximum signal transfer from the yagi to the Cel-Fi RS2 repeater.

telstra smart antenna repeater installed in house

Why is it legal?
Many mobile service providers have not supported the use of personal repeaters on their network. This is due to the interference they can cause when connected to the network, or when they are setup incorrectly. The Cel-Fi system is the only personal repeater that has been widely approved by carriers in Australia.

The Smart Repeater system is very different to a standard repeater, as it was designed to provide maximum coverage, be network friendly and can be easily installed by the end user.

It does this in several ways by:
- continuously monitoring power levels of the cell tower it is connected to and constantly adjusting its output power to suit.
- only amplifying and disbursing a particular carrier’s mobile signal, operating within a set frequency band.
- giving the service provider the ability to shut down the repeater remotely if needed, using a signal from the base station.
- not interfering with the carrier’s network or other users on the network.
- having a unique installation process to eliminate feedback into the mobile network.

Please read before considering: Terms and Conditions.
We apply to Telstra on your behalf to have this product registered to your address and used on Telstra's Network. Sometimes there maybe a slight delay in this process, please allow 2 to 3 days extra.

Telstra require you to supply a Physical address to register the repeater against, so please if you are using a PO Box for delivery address, please provide the physical address in the Billing fields, . We will also require a phone number to register the repeater with.

Special Delivery Information
This product is a whopping 2.4m long and can only be delivered by a courier (not Australia Post). As such we cannot accept a PO Box. Please provide an address where someone will be present to sign for the package.

Price: $1,399.00

10m LMR400 included, use this box to add more cable.

Please enter the full street address including town, state and postcode

Please provide your drivers licence/passport number (individuals) or ABN number (businesses)

To be eligible you must answer yes to all the above questions.