Telco X1 Pro LTE Router
Telco X1 Pro LTE Router
600Mbps LTE-A Pro Modem Router: Gigabit Ethernet & Dual band WiFi
Downloads
Product Overview
Telco X1 Pro is the ultimate in modem router performance. Designed to be uncompromisingly fast, unbelievably rugged, and shock tested for reliability you can count on, the Telco X1 Pro delivers 600Mbps MIMO CAT-12 LTE-A Pro connectivity, gigabit ethernet, and dual band 802.11ac Wave-2 WiFi in a rugged, mountable package ready for indoor or enclosure installation.
Maximum Performance
Shred through data packets with an extremely powerful quad core, hardware accelerated Qualcomm® IPQ4019 ARM System-on-a-Chip (SoC).
MIMO LTE Advanced Pro
Multiple-In Multiple-Out (MIMO) is the cornerstone of LTE-Advanced Pro and the X1 Pro gives you everything you need to max out your connection to the Category 12 LTE-Advanced Pro specification, starting with: external antenna connectors, global frequency band support, band locking, and custom APN selection.
Ideal Use Cases
-
Establishing an ultra fast primary or backup Internet connection via 4G LTE
-
Failover between wired WAN and CAT-12 4G LTE-A Pro
-
Small to medium enterprises
-
Vehicle, marine or caravan use
-
Home/Office installations that require high speed 4G internet
-
Rural areas, or areas with poor signal quality
-
Creating high data capacity dual band WiFi hotspots
Top Features
- Band Locking
- Bridge Mode
- DIN Rail support
- Industrial rugged design
-
Fully featured MIMO LTE Router
-
Telco Cloud Management System™ support for remote monitoring
-
External WiFi antenna connectors (2x RP-SMA Female)
-
External mobile data antenna connectors (2x SMA Female)
-
Dual band 2.4GHz and 5GHz WiFi (802.11b/g/n/ac)
-
New 802.11ac Wave-2 WiFi
-
4x Gigabit Ethernet LAN ports
-
1x Gigabit Ethernet WAN port
-
600Mbps Cat-12 LTE-A Pro Modem
-
Quad-core ARM Cortex A7 processor (IPQ4019 SoC)
-
External, tray style SIM card slot (nano SIM)
-
Modular mounting options for DIN rail and backboard mounting
-
3G/LTE Global frequency band support
-
Convenience: Extra long 3m power cable, DIN rail mounting options
Bridge Mode
We are excited to introduce Bridge Mode with our upcoming Telco X1 Pro
Bridge Mode lets you eliminate the double NAT problem by allowing a connected device, rather than the X1 Pro, receive the public IP address from the mobile network. If you already have your own gateway, router or firewall, running in Bridge Mode is ideal because you can feed the ultra fast 4G connection of the X1 Pro to your existing network without having to make any changes to your existing setup.
Technical Specifications
Gallery
Example Application - Remote Monitoring of Solar Power System
The Telco X1 Pro integrates perfectly into a box by mounting either to a DIN rail, or directly to the backplate with attachable brackets. In this configuration the X1 Pro is ready to provide high speed data access in remote or low signal areas, powered via a solar panel. There is plenty of room to maneuver the X1 Pro to fit additional equipment. Optionally, a long range WiFi hotspot can be created by connecting the WiFi antennas on the right hand side to suitable external antennas; or a localised hotspot for administration of the box can be created by attaching the included WiFi antennas inside the box, as the box is made of plastic.
