Telstra Network Cel-Fi Pro - Smart Repeater for 3G & 4G


Key Features


  • Minimise dead zones & reduce dropped calls

  • Simple 3 Step installation - no cabling or configuring required

  • Supports 3G 850, 4G 700/1800 MHz (only one 4G band at a time)

  • Locked to Telstra's Next G, 4G and 4GX Networks

  • External antenna port.




  • The Mobile Smart Repeater for Telstra is a convenient solution to poor indoor 3G phone coverage and 4G Internet service

  • Installing this device in your home can improve the reliability of phone calls, text messages, and increase 4G mobile broadband signal

  • For areas with poor outdoor coverage, this model has an external antenna connector to allow the connection of a larger antenna

  • Once set up, the unit will rebroadcast signal throughout the building allowing nearby mobile phones to automatically receive stronger signal - no pairing, no fiddling about.


telstra smart antenna repeater installed in house


Maximum coverage and network friendly


  • Many mobile service providers do not support the use of personal repeaters on their network, this is due to incorrect set-up or the interference they can cause when connected to the network

  • The Cel-Fi system is the only personal repeater that is widely approved by carriers around the world

  • The Smart Repeater system is different to a standard repeater, as it's designed for maximum coverage, is network friendly and easy to install.


How does it work?


The Cel-Fi system:

  • continuously monitors power levels of the cell tower it is connected to, constantly adjusting its output power to suit

  • amplifies and disburses a particular carrier’s mobile signal, operating within a set frequency band - this means the service provider can shut down the repeater remotely if needed by using a signal from the base station

  • does not interfere with the carrier’s network or other users on the network

  • has a unique installation process to eliminate feedback into the mobile network.


Telstra Network Requirements


  • This repeater will only operate on the Telstra network

  • This device is an actively boosted radio transmitter, and is subject to regulatory requirements

  • We apply to Telstra on your behalf to have this product registered to your address and used on Telstra's Network - sometimes there may be a slight delay in this process, please allow two to three days

  • Please read the Terms and Conditions before considering.


Read More




Shipping Weight 0.0450kg
Shipping Width 0.300m
Shipping Height 0.200m
Shipping Length 0.400m
Shipping Cubic 0.024000000m3