Ubiquiti airFiber 5GHz 1Gbps Wireless Bridge
Ubiquiti airFiber 5GHz 1Gbps Wireless Radio
NO WARRANTY DUE TO AGE
Class-licensed 5.8GHz ISM band (unlicensed-band)
Up to 1Gbps aggregate throughput (500Mbps full duplex)
1/4QPSK to 256QAM adaptive modulation
>500Mbps under 15km
50VDC GigE PoE injector & Australian 240VAC power cord included.
Innovative Proprietary Modem Technology
Ubiquiti’s innovative proprietary modem technology was purpose-built to address the specific challenges of outdoor, PtP (Point-to-Point) bridging and high-performance network backhauls
Every aspect of the radio has been carefully simulated and designed to optimise range, speed, and latency performance in the harshest RF noise environments.
Due to the very small antenna size, airFiber 5 units should only be used for short range links
Maximum recommended distance for AF5 units is around 10km, Telco engineers will not install these units outside 5km
Synchronous Data Transmission and Reception
Conventional wireless standards impose a latency by having to receive a packet before a packet is transmitted
airFiber can transmit data synchronously without any wait time. airFiber features traditional TDD and FDD modes of operation in addition to the proprietary Hybrid Division Duplexing (HDD) mode, which provides a breakthrough in range and spectral efficiency performance
Based on the ranging algorithm built into the air protocol, the airFiber radios use patent-pending HDD technology to calculate the propagation delay and know when each radio can transmit and receive, so they send packets in precise synchronization
Packet transmission latency is virtually eliminated.
AirFiber 24GHz model shown.