Custom Made Cat6 Outdoor Shielded Cable - Select Requirements Below


  • Professionally made to order by ACMA licensed cablers

  • Industrial grade WISP cable

  • Tough, thick black UV-stable outer jacket

  • 1000BASE-T Certified Category 6

  • F/UTP foil shielded twisted pair

  • Anti-Crosstalk Divider

  • ESD drain for outdoor installations

  • Reduced EMI crosstalk and higher SNR

  • Choose cable length and connector arrangement using drop down fields.





Introducing WildCat Shielded Cables




Protect your network from electronic static discharge, reduce system noise, and improve long distance performance with Telco WildCat Category 6 F/UTP Ethernet cables. The Wildcat series have been developed specifically for outdoor microwave and point to point/multipoint networking in mind. Heavily shielded from EMI/ESD and sporting a thick outdoor jacket (7.4mm OD), the cable series is designed for installation in exposed and harsh environments, as well as electrically-noisy indoor environments.


cat6 outdoor shielded ethernet cable break down layers





Wildcat Outdoor Cat6 cables are fully ACMA S008:2010 compliant allowing them to be legally installed under your Open Cabling licence. This cable is the only compliant shielded Cat6 outdoor-rated cable available in Australia.


















































Electrical Specifications   Mechanical/Environmental Specifications  
Resistance: 100Ω Conductor Material: Bare Copper 23AWG (0.55mm ± 0.01mm)
Capacitance: <330pF/m Insulating Material: HPDE (0.20mm)
Velocity of Propagation: 69% Cross Driver: Yes
Nominal Delay: 0.45ns/m Drain Wire: 0.50mm Bare Copper
Voltage Withstand: 300Volts DC Outer Shield Material: Aluminium Foil (0.08mm)
    Outer Jacket Material: Black UV PVC CMR (0.7mm ± 0.10mm)
    Outer Diameter: 7.4mm ± 0.20mm
    Operating Temperature: -20 +60°C
    Standards: ISO/IEC 11801 Ed.2, ANSI/TIA 568-C.2, AS/NZS 3080, AS/CA S008:2010


















































ACMA Austel compliant LAN ethernet cables