DC-DC Passive Power over Ethernet Injector
- Suits 48V solar power systems
- 36-72VDC systems
- 24VDC 1.25A 802.3af Mode B PoE output (passive)
- Dual block inputs for connecting 2 power sources
- Short Circuit, Over Current and Reverse/Over Voltage Protection
- High Temperature Operation
- Ideal for Ubiquiti devices.
This series of DC to DC converters are a low cost and high reliability solution for those requiring 24VDC Power over Ethernet voltage from a 48V battery system. They have an integrated POE injector to apply 24VDC to Ethernet cable in 802.3af Mode B (Passive) PoE pin arrangement (no handshake). They have two isolated inputs for connecting 2 power sources, like a primary and backup power source. A metal enclosure model is available for industrial applications. They accept data-in to a shielded RJ45 Jack and provide data-out and POE power on the shielded RJ45 output jack. They work by supplying power on the unused Ethernet pins 4,5(V+) and 7,8(V-).
Input voltage: 36 to 72V DC Input current: 2.05A max at 12V DC at F.L 1.0A max at 24V DC at F.L Output voltage and current: +24V non-802.3af Max load: 1.25A Power: 30W maximum Min load: 0.01A Load regular percentage: 5% Line regular percentage: 1% Ripple percentage: 1% Noise percentage: 1% Total power: 30W Ripple and noise bandwidth: from DC to 20MHz Terminated with 47uF capacitor and 0.1uf MPE capacitor of proper polarity Efficiency: 75% min at 12V/24V DC, input at F.L Short-circuit protected output Short GND terminal to prevent damage to power supply Auto-recovery Input fuse protection Current limit: 120 to 160% at 36V to 72V DC
Construction: ABS Plastic Operating temperature: -25 to 50° Celsius Storage temperature: -40 to 80° Celsius Operating humidity: 5 to 90% Cooling: Free air Dimension: 125 x 72 x 38mm (L x W x H) Standards: EN60950-1, FCC Class B, EN55022 Class B