Heavy Duty Galvanised Tin Roof Mount, 50mm OD

  • Can support large antenna applications or point to point systems
  • 50mm OD (Outside Diameter) custom length galvanised pole
  • 1200mm stay bars made from 30mm pipe with pressed ends to 45deg each
  • 5mm thick base plate with fully welded cleats

Fabricated in our workshop Telco Antennas' steel antenna mounts have been specifically designed to meet a demand for large, heavy duty roof mount that can be customized to suit any application. These mounts include a compensating ridge for standard corrugated iron and tin roofs. This mast has been engineer certified for wind survivability in Regions A1 - A5, B, C, and D. Please contact us for maximum dish size and heights for your region.
This mount is simple, strong and easy to install, installation instructions can be found below. Due to the complicated nature of tower infrastructure it can prove extremely valuable to have an engineer approved recommendation for a solution that will accommodate a particular project. Telco offers a Tower Recommendation Proposal Consultation Service, this provides the customer with a report that can be used for planning of communication assets.

Masts and Towers have a wait time of minimum 2-3 days


Shipping Weight 14.0000kg
Shipping Width 0.100m
Shipping Height 2.000m
Shipping Length 0.150m