Netcomm 3G39W Patch Lead - Connects 3G WiFi Router to your antenna (FME Male). - 15cm RG316 cable with SMA Male connector - Boost the signal strength and speed of your Netcomm 3G39W HSPA+ Router.

Why use an external antenna?

Next time you're out-and-about look around you - every day thousands of Australians use external antennas to enjoy fast, uninterrupted wireless broadband internet. If you're in a rural, hilly, low signal area, or you can't get a good signal indoors there's no need to tear your hair out over slow mobile broadband crashing or dropping out half way - an external antenna is often all you need.

What does a patch lead do?

Most antenna cables terminate with a standard connection, most commonly a female 'FME' connector. To plug an antenna into your phone or wireless modem, you need a short cable that acts as a conversion from the FME connector to the device-specific connector that will plug into the antenna port on your device.

Connectors
SMA male connector FME male coaxial connector
Male SMA Connector
Male FME Connector
Electrical Specifications
Resistance: 50Ω Frequency Range: DC-3GHz Working Voltage: 335V RMS Withstand Voltage: 1000V RMS Insertion Loss: <0.4dB/3GHz VSWR: <1.25:1
Mechanical/Environmental Specifications
Cable: 150mm RG316 Durability: >500 cycles Body Material: Brass Plating Material: Nickel/Gold Pin/Socket Contact: Beryllium Pin/Socket Plating: Gold/Gold Insulator: PTFE Operating Temperature: -55° to 155° C
Read More
Current stock levels: Approx. 1000 units.

(1233)

SKU 1233
Shipping Weight 0.0450kg
Shipping Width 0.050m
Shipping Height 0.050m
Shipping Length 0.300m
Shipping Cubic 0.000270m3