Netcomm NTC-6908 Industrial 3G Router Patch Lead - Connects 3G WiFi Router to your antenna (FME Male). - 15cm RG316 cable with SMA Male connector - Boost the signal strength and speed of your Netcomm NTC-6908 Router.

Why use an external antenna?

Next time you're out-and-about look around you - every day thousands of Australians use external antennas to enjoy fast, uninterrupted wireless broadband internet. If you're in a rural, hilly, low signal area, or you can't get a good signal indoors there's no need to tear your hair out over slow mobile broadband crashing or dropping out half way - an external antenna is often all you need.

What does a patch lead do?

Most antenna cables terminate with a standard connection, most commonly a female 'FME' connector. To plug an antenna into your phone or wireless modem, you need a short cable that acts as a conversion from the FME connector to the device-specific connector that will plug into the antenna port on your device. sma to fme patch cable lead

Connectors
SMA male connector FME male coaxial connector
Male SMA Connector
Male FME Connector
Electrical Specifications
Resistance: 50Ω Frequency Range: DC-3GHz Working Voltage: 335V RMS Withstand Voltage: 1000V RMS Insertion Loss: <0.4dB/3GHz VSWR: <1.25:1
Mechanical/Environmental Specifications
Cable: 150mm RG316 Durability: >500 cycles Body Material: Brass Plating Material: Nickel/Gold Pin/Socket Contact: Beryllium Pin/Socket Plating: Gold/Gold Insulator: PTFE Operating Temperature: -55° to 155° C
Read More
Current stock levels: Approx. 1000 units.

(1241)

SKU 1241
Shipping Weight 0.0450kg
Shipping Width 0.030m
Shipping Height 0.300m
Shipping Length 0.300m
Shipping Cubic 0.002700m3