Patch Lead for Optus 4G Huawei E5377 WiFi Modem
- Connects the WiFi modem to your antenna (FME Male)
- Highest quality & best fitting connector on the market
- 15cm of RG316 cable with CRC9 connector
- Helps boost signal strength and speed of your MIMO LTE 150Mbps rated device

Why use an external antenna?


Next time you're out-and-about look around you - every day thousands of Australians use external antennas to enjoy fast, uninterrupted wireless broadband internet. If you're in a rural, hilly, low signal area, or you can't get a good signal indoors there's no need to tear your hair out over slow mobile broadband crashing or dropping out half way - an external antenna is often all you need.

Take full advantage of the fast speed the Optus 4G network offers. If you're outside the official 4G 'coverage zone', using an external antenna can help you lock on, or increase the signal strength and speed of your 4G connection. To learn more about the Optus 4G network please see our Optus 4G Guide

Which connector type do I need?


We offer both the standard FME connector that you will find on 90% of antenna cables, and the less common SMA connector sometimes used. The following images will help you identify which connector your antenna cable has, and consequently what patch lead you require. If you don't yet have an antenna, you can find what connector your antenna will have at the bottom of it's description.

FME patch lead vs SMA patch cable

Read More

(2870)

SKU 2870
Shipping Weight 0.0450kg
Shipping Width 0.050m
Shipping Height 0.050m
Shipping Length 0.300m