Telstra Pre Paid 4GX Wi-Fi Pro (Huawei e5787) Patch Lead

 

Key Features

 

  • Connect your WiFi modem to an external antenna (FME Male or SMA Female)

  • Heavy duty short-barrel TS9 connector

  • 15cm of RG316 cable

  • Huawei E5787 4G mobile broadband hotspot has two antenna ports. Use Port-1 when connecting only one antenna. We recommend the use of dual antennas in 4G areas

  • Current stock levels: Approx. 900 units.

 

Why use an external antenna?

 

  • Next time you're out-and-about look around you - every day thousands of Australians use external antennas to enjoy fast, uninterrupted wireless broadband internet

  • If you're in a rural, hilly, low signal area, or you can't get a good signal indoors there's no need to tear your hair out over slow mobile broadband crashing or dropping out half way, when an external antenna is often all you need.

 

What does a patch lead do?

 

  • Most antenna cables terminate with a standard connection - most commonly a female 'FME' connector

  • To plug an antenna into your phone or wireless modem, you need a short cable that acts as a conversion from the FME connector to the device-specific connector, that will plug into the antenna port on your device.

 

Telstra WiFi Advanced Pro X External Antenna

 

  • The Telstra 4G E5787 device uses MIMO technology along with Carrier Aggregation.

  • This technology uses two antennas to theoretically double your speed in selected areas, and CA to combine several frequencies together to permit even higher data rates.

  • To check whether your area is MIMO enabled, or to learn more about the Telstra 4G network, use our Telstra coverage map guide

  • When outside the 4G network area the modem will only use one radio and require only one antenna to be connected. This antenna must be connected to Port-1 - you can find the port numbers written on the port covers.

 

Which connector type do I need?

 

  • We offer both the standard FME connector that you will find on 90% of antenna cables, and the less common SMA connector

  • The following images will help you identify which connector your antenna cable has, and consequently what patch lead you require

  • If you don't yet have an antenna, you can find what connector your antenna will have at the bottom of its description.



FME patch lead vs SMA patch cable

 

Read More

 

(TS9-e5787)

SKU TS9-e5787
Shipping Weight 0.0450kg
Shipping Width 0.050m
Shipping Height 0.050m
Shipping Length 0.300m
Shipping Cubic 0.000750000m3