ZCG Scalar Sidemount Dipole - Air Band VHF
- Entire band 118-136MHz factory tuned
- Fully welded aluminium construction
- 100% Australian made
The exceptionally broad bandwidth and reliable construction make sidemount dipoles perfect for use as a base station antenna. Nominally 0dBd gain for a single bay, approximately 2.3dBd of forward gain results by using the mount pole as a reflector at 0.2 wave spacing. Higher gain and power can be achieved by mounting dipoles in stack array formations. Mast to tower distance can be varied to produce the desired radiation pattern. ZCG Scalar can supply the necessary power divider or phasing harness, branch feeder cables and connectors. Radiating elements operate at DC ground potential to eliminate static noise and interference. An N-Female connector rated for up to 250 watts power is fitted to the cable tail. A right-angle mast mounting clamp, coaxial feeder cable, connectors and other installation accessories are all available separately.
|Network Compatibility|| || |
|Air Band (118-136MHz)|| || |
Frequency Range: 118-136MHz Input Impedance: 50Ω VSWR: <1.5:1 (better than 15dB) Polarisation: Vertical Radiation: Omnidirectional Maximum Power: 250Watts
Construction: Welded Aluminium Cable: 1m RG213 coaxial Connector: N Female Dipole Height: 1.035m Weight: 2.5kg Wind Load at 160kph: 1.27kg Mounting: None supplied, ZCG Y2300 clamp recommended.
What connection does this antenna have?
This antenna has a 1m RG213 cable that terminates with an N Female connector.
If you would like a shorter length of cable, or a different connector please send us an email and we can customise this antenna for you.
Important Stock Information This item is not always stored at our QLD warehouse, but is available within 24-48 hours from order.