Telco XPOL 24dBi 2.4GHz Solid Dish Antenna

  • Dual-polarised antenna feed w/ high isolation
  • Carrier grade aluminium alloy construction
  • Mechanical tilt adjustment
  • High gain, high F/B ratio
  • Critical backbone/backhaul
  • Ideal for Ubiquiti M2, Vivid Wireless, WiFi, 2300/2600MHz MIMO LTE
Ideal for Optus 2300MHz 4G
This high grade antenna has been designed with operation on the Optus 2300MHz TDD LTE network. Areas such as Canberra exclusively use Optus 2300MHz 4G to provide very high speed 4G connections. Please check to ensure your area is using 2300MHz before purchasing.
WiFi & Wireless Operation
Having an ultra tight V&H beamwidth and high F/B ratio gives this antenna a high degree of noise immunity from nearby hostile interferers and collocated transmitters. While in short range communications, smaller form-factor equipment can be deployed, but this can leave the link susceptible to interference and reduced throughput due to link adaptation. Another concern is causing channel pollution (observed as a rise in noisefloor at other APs/stations), particularly when the transmitter is tower or rooftop mounted.
4G LTE
Covering both 2300 and 2600MHz LTE bands, this antenna is ideal for dramatically increasing sustained data rates, improving connection reliability, and maximising physical layer spectral efficiency. Both network operators and users benefit from installing this antenna at customer premises - by increasing spectral efficiency and achieving maximum CQI the UE's radio can operate at a significantly higher modulation and coding rate, resulting in faster speeds for the customer and reduced load at the base station. This antenna is ideal for long range Optus 2300MHz LTE-TDD.
Network Compatibility
Yes/No
Gain
Optus 4G/Vivid Wireless (2300MHz)
compatible
24dBi
NBNCo Fixed Wireless (2300MHz)
compatible
24dBi
4G LTE-TDD Bands 38, 40 (2300MHz)
compatible
24dBi
802.11 b/g/n WiFi (2400MHz)
compatible
24dBi
AirMAX M2 MIMO (2400MHz)
compatible
24dBi
4G LTE-FDD Band 7 (2600MHz)
compatible
24dBi
4G LTE-TDD Bands 40, 38, 41 (2600MHz)
compatible
24dBi

Electrical Specifications

Frequency Range: 2300-2700MHz Input Impedance: 50Ω VSWR: <2.0:1 Vertical Beamwidth: 12° Horisontal Beamwidth: 11° Front to Back Ratio: >26dB Maximum Power: 100Watts

Mechanical/Environmental Specifications

Construction: UV-Stable Powdercoat Aluminium Cable: None Connector: 2x N-Type Female Wind Rating: 216km/hr Temperature: -40°C +65°C Weight: 5.5kg Dimensions: 648mm (dia) Mounting: 50-75mm (dia) pole
Read More
telco networks logo brand

(XPOL-2327-24)

SKU XPOL-2327-24
Brand Telco Antennas
Shipping Weight 0.0450kg
Shipping Width 0.660m
Shipping Height 0.220m
Shipping Length 0.830m