Telco LCU195 Coaxial Cable Cut to Measure
- High quality LCU195 series cable cut to measured lengths.

Introducing dB-FLEX


dB-FLEX is Telco's flagship subtype of LCU195 cabling, designed for maximum weather resistance and usability. LCU195 dB-FLEX sports a 7-strand bare copper centre conductor which permits repeated bending and much greater flexibility, allowing an incredibly tight bend radius - similar to Times Microwave's LMR-195 UltraFlex. Both dB-FLEX and UltraFlex cables achieve this by trading off for a marginally higher per-metre loss, up from 0.36dB/m to 0.42dB/m @ 850MHz.



dB-FLEX has a UV-stable TPE (Thermoplastic Elastomer) jacket designed for harsh outdoor environments while maintaining maximum flexibility and minimising plastic memory (for improved wall-cavity feeding).




Please note emergency stock fulfilment may use standard LMR-195 cable. If you specifically require dB-FLEX cable please advise when placing order.







Electrical Specifications

Resistance: 50Ω

Capacitance: 83.3pF/m

Signal Loss: 0.42dB/m @ 850MHz, 0.63dB/m @ 1800MHz

Frequency Range: DC-6GHz

Velocity of Propagation: 76%

Nominal Delay: 4.17ns/m

Voltage Withstand: 1000Volts DC

Peak Power: 2.5kW

Mechanical Specifications

Weight/100m: 3.0kg

Operating Temperature: -40° ~ +85°C

Minimum Bend Radius: 12.7mm

Conductor Material: Seven Strand Solid Copper (0.94mm)

Insulating Material: Foam PE (2.79mm)

Outer Shield Material:

- (1) Bonded Aluminium Polyester Tape 100% Coverage (2.95mm)

- (2) Tinned Copper Wire 88% Coverage (3.53mm)

Outer Jacket Material: TPE Weather & UV Resistant (4.95mm ±0.15mm)







Read More





telco networks logo brand




Shipping Width 0.050m
Shipping Height 0.100m
Shipping Length 0.010m
Shipping Cubic 0.000010m3