Panorama 2x2 MIMO  4G & 5G Directional Panel Antenna

 

Key Features

  • Ultra wide-band coverage 700 to 3800MHz

  • Wall Mount, Pole Mount & Desk Mount

  • Your choice of cable length and connectors (SMA or N-type)

  • Two cables for true 2x2 MIMO operation

  • Wide spectrum design, suits all current and planned cellular networks (including future 5G Networks).

 

Additional Information

  • The brilliance of this antenna is its wideband design - operating on three separate bands 698-960MHz, 1710-2700MHz, and 3400-3800MHz

  • With a compact design this panel antenna will stand up to the challenge of ever-changing network frequencies for years to come

  • This is one of the few antennas on the market capable of covering the recently auctioned 5G spectrum, as well as all current 4G Mobile Networks utilised in Australia.

 

Usage

 

  • Not sure if you'll get 5G? With an equally high gain on all other 4G networks, you can still improve your current connection

  • Take full advantage of the blistering fast 4G network it won't matter whether you are with Telstra, Optus and Vodafone's or one of their resellers

  • If you're outside the official 4G 'coverage zone' this antenna will help you lock on, or increase the signal strength and speed of your 4G connection.

  • Ideal for suburban and metro areas

  • Antennas like this that offer a Wide Beamwidth are ideal for areas where hills and buildings are very close to your location

  • This antenna rests at ground potential, providing improved lightning protection and reduced precipitation static noise

  • Termination is via your choice of 'N' female coaxial connectors fitted to short cable tails, or SMA male connectors fitted to 5m CS29 cables

  • If used as a 5G or you are connecting to the higher bands within the 4G offering we strongly suggest selecting the 500mm N Female option and using LCU400 extension cables due to the high attenuation losses suffered on higher frequencies. 

 

Specifications / Frequency

 

Network Compatibility
Yes/No
Gain
Telstra 4GX (700MHz)
compatible
6dBi
Optus 4G+ (700MHz)
compatible
6dBi
Vodafone 4G+(850MHz)
compatible
6dBi
Telstra/Optus/Voda 4G (1800MHz)
compatible
9dBi
Optus 4G/Vivid Wireless (2300MHz)
compatible
9dBi
LTE-TDD Bands 38, 40 (2300MHz)
compatible
9dBi
802.11 b/g/n/ac WiFi (2400MHz)
compatible
9dBi
Telstra 4Gx (2600Mhz)
compatible
9dBi
Optus 4G+ (2600Mhz) compatible 9dBi
Future 5G Networks compatible 9dBi

 

Electrical Specifications

 

  • Frequency Range: 650-960MHz / 1710-2700MHz / 3400-3800MHz

  • Input Impedance: 50Ω

  • VSWR: <2:1 

  • Vertical Beamwidth: 70° / 100° / 80°

  • Horisontal Beamwidth: 60° / 165° / 55°

  • Maximum Power: 20 Watts

 

Mechanical/Environmental Specifications

 

  • Construction: White Impact Resistant ASA

  • Cable: 500mm tails or 5m CS29 cables

  • Connector: N-Type Female or SMA Male

  • Temperature: -30°C +80°C

  • Weight: 0.955kg

  • Dimensions: 230 x 180 x 94mm (L x W x D)

  • Ingress Protection: IP65

 

Read More

Specification Sheet

Install Instructions

(WMM8G-7-38-5SP)

SKU WMM8G-7-38-5SP
Shipping Weight 1.5000kg
Shipping Width 0.350m
Shipping Height 0.150m
Shipping Length 0.250m
Shipping Cubic 0.013125000m3