Telco Industrial Class Omnidirectional MIMO Antenna Kit

Key Features

• High gain (min 5dBi) across all cellular bands

• Industrial grade weatherproof fibreglass radome

• Highest practical wideband gain

• Carrier Aggregation ready

• Nominal MIMO (V+V) with high isolation

• Wide spectrum design, suits all current and planned networks (including 700MHz 4GX).

Additional Information

• This industrial grade multiband omnidirectional antenna sports an extremely wide bandwidth design - operating on two bands 698 to 960 MHz, 1710 to 2700 MHz covering 4G cellular bands with high gain and high efficiency

• This is the only high gain omnidirectional MIMO antenna kit on the market capable of covering Telstra and Optus' new 4GX and 4G+ 700 MHz (Band 28) and 2600 MHz (Band 7) networks, as well as standard 1800 MHz 4G (Band 3).

Usage

• This antenna kit is recommended for locations where there is not a clear dominant direction signal, such as very hilly 'multipath' areas, or heavily forested areas where signal is diffused

• With Telstra and Optus having activated 700 and 2600 MHz networks early 2015, Vodafone starting a long range 850 MHz 4G network, Optus operating a 2300 MHz TDD network in some areas, and Telstra running 900 and 2100 MHz 4G in others, deploying a 4G antenna can be a nightmare

• Take full advantage of the blistering fast speed your 4G network offers - regardless of frequency, with this high performance carrier-aggregating antenna

• This is an ideal antenna for remote telemetry and mobile/semi-mobile stations

• Unlike some base station antennas which have lossy coaxial cable, this antenna has an integrated N Female connector located at its base, allowing for direct attachment of low loss feeder/riser cables

• Designed specifically for mast mounting, the antenna's heavy duty aluminium mounting tube can be mounted using the supplied parallel U-bolt clamp.

Specifications / Frequency

Network Compatibility	Yes/No	Gain
Telstra 4GX (700 MHz)		5 dBi
Optus 4G+ (700 MHz)		5 dBi
LTE Bands 12-14, 17, 28, 29, 44 (700 MHz)		5 dBi
Telstra Next-G™ (850 MHz)		6 dBi
Vodafone 4G+ (850 MHz)		6 dBi
Telstra/Optus/Voda 4G (1800 MHz)		8.4 dBi
LTE Bands 2, 25, 35-37, 39 (1900 MHz)		8.3 dBi
LTE Bands 1, 33, 34 (2100 MHz)		9.4 dBi
Optus 4G TDD (2300 MHz)		7.8 dBi
LTE-TDD Bands 40 (2300 MHz)		7.8 dBi
802.11 b/g/n/ac WiFi (2400 MHz)		8.4 dBi
LTE Band 41 (2500 MHz)		7.0 dBi
LTE Bands 7, 38 (2600 MHz)		8.0 dBi
Telstra 4GX Band 7 (2600 MHz)		8.0 dBi

Electrical Specifications

• Frequency Range: 698-960 MHz / 1710-2700 MHz

• Input Impedance: 50 Ω

• VSWR: <2.0:1 (1.8:1 / 1.6:1 typical response)

• Polarisation: Vertical Linear

• Vertical Beamwidth: 30° (± 5°) / 20° (± 5°)

• Radiation: Omnidirectional

• Maximum Power: 150 Watts

Mechanical/Environmental Specifications

• Construction: Fibreglass Radome, Aluminium Mounting System

• Cable: none Input

• Connector: 1x N-Type Female White Bronze

• Wind Rating: 210 km/hr

• Temperature: -40 °C to +60 °C

• Weight: 3 kg

• Dimensions: 1500 x 52 mm (L x Ø)

• Mounting: 35-80 mm Ø pole (min 50 mm for 210 km/hr rating)

• This antenna has been laboratory tested in a certified 3D Anechoic Chamber

• All electrical specification and performance listed has been produced from real-world test data, and not the product of computer simulation