Telco XPOL 2X2 MIMO 13-16 dBi Industrial Class Panel Antenna

Key Features

• Dual-polarised antenna feed with high isolation

• Industrial grade weatherproof FRP radome

• High gain, high F/B ratio

• Two integrated N Female connectors

• 700 MHz 4GX with full Next-G fallback.

Usage

Our aim was to design an antenna that provides the best possible performance on the 700 MHz network while maintaining fallback onto Next-G networks should there be an issue connecting to the network.

• This heavy duty panel antenna provides an incredibly high gain over the new Telstra and Optus 700 MHz 4G networks, along with full fallback onto Next-G networks (850 MHz and 900 MHz)

• This antenna has been carefully designed to provide the highest practical gain on the new 700 MHz 4G networks, ideal for long range Telstra 4GX and Optus 4G+ connections, and locations where signal strengths are extremely low

• The XPOL700-900 also offers best-in-class performance for 900 MHz point to point/multipoint wireless links

• Offering a very low VSWR and <-140 dBc PIM, this antenna is not only ideal for tough receiver environments, but is suitable for broadcast and carrier operations while offering best-in-class performance

• The unavoidable limitation of operating on such a low frequency is its long wavelength, and as such the antenna is quite large. Consequently this antenna strictly requires a minimum 50mm diameter mounting pole, such as a Heavy Duty Galvanised Mast.

A heads up!

• This antenna is large and of considerable weight.

Specifications / Frequency

Network Compatibility	Yes/No	Gain
Telstra 4GX (700 MHz)		16 dBi
Optus 4G+ (700 MHz)		16 dBi
Telstra Next-G™ (850 MHz)		14 dBi
Vodafone 4G+ (850 MHz)* *Please check Vodafone Coverage Map		14 dBi
LPWAN (915 MHz)		15 dBi

Electrical Specifications

• Frequency Range: 698 to 960 MHz

• Input Impedance: 50 Ω

• VSWR: <1.6:1

• Polarisation: ±45° (XPOL)

• Vertical Beamwidth: 30° (± 15°)

• Horizontal Beamwidth: 30° (± 15°)

• Front to Back Ratio: >25 dB

• Inter-Port Isolation: >26 dB

• PIM IMD (3rd Order): <-140 dBc

• Radiation: Directional

• Maximum Power: 100 Watts

Mechanical/Environmental Specifications

• Construction: Heavy Duty FRP Radome, Galvanised mechanical-tilt bracket

• Cable: None

• Input Connector: 2x N-Type Female

• White Bronze Wind Rating: 198 km/hr

• Temperature: -40 °C to +60 °C

• Weight: 12 kg

• Dimensions: 600 x 560 x 156 mm (L x W x D)

• Mounting: 50 to 114 mm Ø pole

This antenna has been laboratory tested in a certified 3D Anechoic Chamber. All listed electrical specification and performance is produced from real-world test data, and not the product of computer simulation.

"So I ordered all the gear and the larger Xpol 3G/4Gx high gain from you guys. WOW.. I had no bars on my modem on the roof just holding it in the air. I hooked up the New high gain Xpol and got 2 solid bars.. this gave me 28MBps down, and 10 up. They were amazed… so was I ! What a great bit of kit."

-- Email Feedback: 15/03/2016

Connection