Telco XPOL 2X2 MIMO Industrial Class Panel Antenna

  • Most popular model
  • Dual-polarised antenna feed with high isolation
  • Industrial grade weatherproof PVC radome
  • High gain, high F/B ratio
  • Two integrated N Female connectors
  • Carrier Aggregation ready
  • Stainless steel mounting bracket
  • Ideal for LTE Small Cell deployments
  • 7/16 DIN or 4.3-10 connector options available on request
  • Wide spectrum design, suits all current and planned networks (including 700 MHz LTE).

This heavy duty wideband panel antenna sports an extremely wideband design - operating on two bands 698-960 MHz, 1710-2700 MHz. As the highest grade multiband panel antenna on the market, this antenna has an incredibly low VSWR and <-140 dBc PIM making it not only the ideal antenna for commercial and industrial 4G applications, but also suitable for broadcast and carrier applications. This is one of the few antennas on the market capable of covering Telstra's new 4GX 700 MHz (Band 28) and 2600 MHz (Band 7) networks, as well as current 1800 MHz 4G, all the while being backwards compatible on all 2G and 3G voice and data networks. This is an incredibly high performance antenna, highly recommended for most suburban, metro, and semi-rural applications.

Typical Use

This is our most popular 4G antenna. With Telstra and Optus having activated 700 and 2600 MHz networks early 2015, Vodafone starting a long range 850 MHz 4G network, Optus operating a 2300 MHz TDD network in some areas, and Telstra running 900 and 2100 MHz 4G in others, deploying a 4G antenna can be a nightmare. Take full advantage of the blistering fast speed your 4G network offers - regardless of frequency, with this high performance carrier-aggregating antenna. Ideal for Vivid Wireless.

telstra 4G rooftop antenna 4GX panel

Network Compatibility
Yes/No
Gain
Telstra 4GX (700 MHz)
compatible
8.4 dBi
Optus 4G+ (700 MHz)
compatible
8.4 dBi
Telstra Next-G™ (850 MHz)
compatible
8.2 dBi
Vodafone 4G+ (850 MHz)* *Please check Vodafone Coverage Map
compatible
8.2 dBi
Optus Regional 3G (900 MHz)
compatible
9 dBi
Vodafone Regional 3G (900 MHz)
compatible
9 dBi
Telstra/Optus/Voda 4G (1800 MHz)
compatible
9 dBi
All Carriers - Urban/Metro 3G (2100 MHz)
compatible
11 dBi
Optus/Vivid Wireless 4G (2300 MHz)
compatible
10 dBi
802.11 b/g/n/ac WiFi (2400 MHz)
compatible
9 dBi
Telstra 4GX (2600 MHz)
compatible
8.6 dBi

 

Electrical Specifications

  • Frequency Range: 698 to 960 MHz / 1710 to 2700 MHz

  • Input Impedance: 50Ω VSWR: <1.6:1 / <1.5:1
  • Polarisation: ±45° (XPOL)
  • Vertical Beamwidth: 60° (± 15°)
  • Horisontal Beamwidth: 60° (± 15°)
  • Front to Back Ratio: >23 dB 
  • Inter-Port Isolation: >26 dB PIM IMD (3rd Order): <-140 dBc
  • Radiation: Directional
  • Maximum Power: 100 Watts         

Mechanical/Environmental Specifications

  • Construction: PVC Radome, 304 Stainless Steel Tilt Bracket
  • Cable: none
  • Input Connector: 2x Integrated N-Type Female White Bronze
  • Wind Rating: 198 km/hr
  • Temperature: -40 °C +60 °C
  • Weight: 3.2 kg + 0.8 kg mounting kit
  • Dimensions: 300 x 330 x 135 mm (L x W x D)
  • Mounting: 25-72 mm Ø pole

 

telco fabrications engineer certified mountThis antenna has been laboratory tested in a certified 3D anechoic chamber. All electrical specification and performance listed has been produced from real-world test data, and not the product of computer simulation.

 

Read More

 

Customer Feedback

"Just like to say a big thank you for your services in the way of 4GX hardware and signal recommendations for my home/ office- Telstra finally turned on 4GX services on the Mt Bakewell tower that services us this weekend just gone. Please see pics attached below of the setup and speed test result (86.43Mbps down, 24.78Mbps up). I posted about it on BIRRR Facebook page on Sunday afternoon and it seems to have drawn a bit of attention since! I am very happy with this result and would happily recommend your services and Telco Antennas to anyone, as I have already done to a few people."

    --Email Feedback (24/11/2015)
 

"BTW that antenna in Mount Isa is brilliant. We are getting the same speed at site as we were in the town off a small Wireless Dongle using 4GX."

    --Email Feedback (17/08/2015)
 

"all is working perfect since the weekend, I have 10-14 times the speed I had before."

    --Email Feedback (12/06/2015)
 

"Just a short note to let you know everything is going well. We have a stable 4G connection delivering speeds of 30-40Mbps download and 5-8Mbps upload. (compares with 0.4/0.8MBps without the external antenna) The antenna orientation is exactly as you modelled. Did the final tune by running a series of speedtests- very small deviations made quite large differences. Modem is showing 2 bars of 4G constantly and is not switching between 3g/HSPDA/4G as it does without the antenna and resulting in latency errors. Thanks- very happy we have joined the internet superhighway at last!"

    --Email Feedback (01/06/2015)
 

"Just letting you know that we now have great mobile broadband speeds with recommended antenna, and router, installed by the local TV techo– almost 40Mbps downloads and 13Mbps uploads. This is about 10 times faster than the best we could do without the antenna and router."

    --Email Feedback (09/03/2015)

 

What connector does this antenna have?

This antenna has two integrated N Female connectors at the base of the antenna. There is no cable supplied.

 

N Flange panel mount connector

N Female Connector

(XPOL700-2700PL)

SKU XPOL700-2700PL
Brand Telco Antennas
Shipping Weight 5.4000kg
Shipping Width 0.400m
Shipping Height 0.280m
Shipping Length 0.400m
Shipping Cubic 0.044800m3